ltr450 parts on the z400. what fits?

[fasterz69]

what parts will fit on the z from the ltr post anything you know that will work

[atfox25]

shocks

[quad9]

rims, tires, handlebars.
front shocks but you have to put them on backwards, and the valving is not right.

[tlronny]

"front shocks but you have to put them on backwards, and the valving is not right."

They can go on normally but the radiator guard must be removed and the valving will depend on the individual bike and rider.
I have them on mine and they're way better than stock !

[slomofo]

hubs, they will make the rear 1" wider. a lot of guys run Z400 hubs on their R450's to narrow them up.

[shftmx300ex]

any pics of the ltr shocks on the Z?

[tlronny]

Here ya go

http://img.photobucket.com/albums/v209/tlronny/ltr1.jpg

http://img.photobucket.com/albums/v209/tlronny/z1.jpg

[05Z400rdr]

i know this aint what ur talking about, but in case it comes in handy for any1 else....the ltr n the z both have the exact same oil filter

also...the ltr bumper should fit on the z with a little bit of bending...

[dan42684]

do the 450 A arms fit the 400?

[Hookrone]

pegs

[dan42684]

do the 450 A arms fit the 400?

[z400r!der45]

how much for the shocks?

[tlronny]

Originally posted by dan42684
do the 450 A arms fit the 400?

No they do not

[meankfx]

does the ltr rear shock work on the ltz

[tlronny]

Originally posted by meankfx
does the ltr rear shock work on the ltz

No

[dan42684]

will the swing arm fit??

[ltz440rider]

tlronny

did you have to do any modding to run the ltr shocks besides puttng them backwards?

[tlronny]

Yes - just some HD washers to take up the gap on the lower mount .
The top ones squeezed in fine.
Be aware that they are a little stiff on stock length a arms.

[ltz440rider]

hd washers??? yeah i know they will be stiff thanks for the concern though.

[tlronny]

Heavy duty washers (alot thicker than normal ones so it doesnt look so bad !

[ltz440rider]

thats what i thought thanks man

[schl48]

how about front and rear sprockets?

[drzoo2]

The front will but I don't think the rear will fit.

[J250r]

Sorry to bump this old thread... But will the LTR plastics work on the z400? From the pictures on Fullbore and Laker the plastics look pretty similar in design.

[250Renvy]

Has anybody tried switching just hubs and spindles for the dual piston front brakes?

[Flynbryan19]

Originally posted by 250Renvy
Has anybody tried switching just hubs and spindles for the dual piston front brakes?

I've read several places that Yfz450 (04-08) which are dual piston calipers mount right up to the stock suzuki steering knuckles.