Clutch problem!!!!!!

[Thumper416ex]

Last week I took a ride with my quad and it had nothing wrong.
Yesterday, I start it and put it in first gear...I release the clutch lever and the bike didn't go forward!!!!
I took off the wire to lube it but it work very well.

It seem to be the little pivot lever where the other extremity of the wire attach that are in default. It doesn't return at his initial position (like when the clutch is fully engaged). Also, when I play with the clutch lever it have a small "dong" noise.

What is the problem???

[YZROOSTINYA]

i have heard of this before, the plunger( i dont know the exact term) is stuck on something or it falls out of its grove. your gonna have to pull the clutch cover

[Thumper416ex]

What do you call the SPLUNGER???

I will take off the clutch cover this sunday and watch this.

Any others suggestions?????

Thanks YZROOSTA.

[YZROOSTINYA]

it is the peice that actually pushes in the basket

#10

http://www.servicehonda.com/HARD%20PARTS/ATV/TRX400EX/trx400ex%20frames%20page.htm