250X_project
07-08-2007, 09:08 PM
I rode a bike('01 KX80) today that has some issues. Starts, and runs great, but then doesn't ride so smooth. When you take off, it will ride fine and suddenly jolt you and the clutch would slip. Up threw the gears the clutch will slip. Then when you want to go back to neutral, and let the clutch out, it wont move at all but you can hear the trans grinding. I have a Z50 with an auto clutch, that would grind before i adjusted the clutch. So I was wondering If it was just the clutch fibers or if the tranny may have some issues as well.
Also, when rolling back with the clutch full disengaged, it will jolt you there also and act the same as if you let the clutch out when in gear and not running.
I've never experienced quite a thing so please shed some light on this for me. Thanks a lot.
-Adam
Also, when rolling back with the clutch full disengaged, it will jolt you there also and act the same as if you let the clutch out when in gear and not running.
I've never experienced quite a thing so please shed some light on this for me. Thanks a lot.
-Adam