Carb question

[450Rfutureracer]

alright i have been having a problem with the slide on the carb, it is sticking when you let go of the gas, meaning that the bike stalls every time it sticks. I have sparyed carb cleaner and after a while the slide still sticks. It has done it before, we sparyed some oil on it but it didn't take long before it started happening again. Does anyone has idea of what is going on and how to fix it? the picture is of the slide all the way down

[450Rfutureracer]

heres another picture of where the slide gets stuck eevery once in a while

[450Rfutureracer]

tryining to post pix

[trx450jason]

Could it possibly be your trottle cable?

[450Rfutureracer]

Originally posted by trx450jason
Could it possibly be your trottle cable?

i dont think so it pulls up right away but when i let go it drags down so i think its on or in the slide or something

[GPracer2500]

Pull off the carb, disassemble it, and clean it with carb cleaner and compressed air. There's probably just gas gum build-up inside there.

[450RRyder]

what type of gas are you using. If you are using u4 it actually makes your throttle stick after long term use. Me and one of my buddies had that problem so i switches to c12 and I didnt have the problem anymore but he still uses u4 so he still suffers with a sticky throttle.

[Elduner]

I had something similar on my 250r it was the cable.... I replaced the cable and it was perfect....

then I cut the end off the old cable to see what happend inside and some wires from the cable had broke off inside and because the way the cable is treaded and interweaved when I would pull it was fine but when it came to closing the carb they would bind inside....

Very easy to check... unplug the cable from the carb and see if there is any resistance at all. If not then check the carb for debris... and like already mentioned take the carb apart and clean it.