yz426 complete motor

[87250rxrider]

yz 426 motor:

the motor was just gone through top and bottom this winter and has only been ridden on for 20 minutes since. has a brand new hinson clutch basket. has blue PC'd stator cover and water pump cover. motor includes stator, flywheel, as well as complete wiring harness. also includes kicker and shift levers.

this motor has the wet sump conversion done ot it and has been raced this way for years with no problems.

the only problem with the motor is that the oil filter cover bolt holes are stripped. the cover still stays on, but requires loctite to keep the bolts held in or plumbers take could be used. if you can weld aluminum, you can fill the holes and have them redrilled and tapped, or you can but another clutch side cover for $50.



i'm asking $800 for the motor including everything i listed.

i also have a lectron carb that was on this bike i could sell for $200.



thanks,
-Ryan

[emrtrx450r]

650.00?

[87250rxrider]

i would have never sold the motor for $650. i just sold the head, and the clutch basket and made $400 off just those 2 things... i think i'll be makin a little more than $650.

[emrtrx450r]

WASNT TRYIN TO OFFEND, GOOD LUCK

[markvette]

what do you have left of the motor and how much for it.

Mark

[87250rxrider]

i have everything minus the clutch plates and basket, and the head. everything else is in pieces on my work bench.

if you want it, make an offer.

[markvette]

in pieces? is the bottom end still together or is it torn down. man i hate making offers, throw me a price and we will go from there.

[87250rxrider]

the bottom end has been torn down b/c some guy wanted the case halves, but then changed his mind... if he didn't say he was gonna take them the entire bottom end would still be together. if you don't mind assembling it, it's not too hard. takes me about an hour to put together the entire bottom end


all i want is $500 for everything. that includes wiring and everything else i have.