PDA

View Full Version : 300 and CDI



wvwoods
06-27-2007, 01:19 PM
What good does an aftermarket cdi box do for a 300ex? My motor is stock with a sparks pipe, kn filter and jetted.

300exOH
06-27-2007, 01:47 PM
Most of them increase the rev limit 1000-1500rpm over stock (roughly) and some will also change the timing curve slightly for better performance.

wvwoods
06-27-2007, 01:50 PM
Does it help with topend or speed?

Flynbryan19
06-27-2007, 02:06 PM
Your money is better spent in a cam or a high compression piston.

blsnelling
06-27-2007, 08:04 PM
I would have to say that a $75 Sparks CDI is a great initial investment. The 300EX is really RPM limited right from the factory. Even a stock 300EX can take advantage of an additional 1000-1500 RPMs. It becomes all that much more important once you start doing other mods.

honda300EXtreme
06-27-2007, 08:09 PM
Originally posted by blsnelling
I would have to say that a $75 Sparks CDI is a great initial investment. The 300EX is really RPM limited right from the factory. Even a stock 300EX can take advantage of an additional 1000-1500 RPMs. It becomes all that much more important once you start doing other mods.

couldnt have said it better

bwamos
06-28-2007, 07:11 AM
I agree with the 2 above me.

wvwoods
06-28-2007, 07:30 AM
Any suggestions of what kind and where to get?

bwamos
06-28-2007, 09:15 AM
I would just send it off to Sparks, FST, or another builder to get the stock box modified.