Size one rear Nut that holds on the Wheel hubs (stock Axle)

[Groves187]

I am tearn down my 440 to swap the parts over to my Hybrid YZ426F and i dont have the right Socket for the Hub nuts on the rear axle, Can anyone tell me what size the nuts are for the stock axle?

Thanks, Nick

IF YOU CAN'T FIGURE OUT SOMETHING LIKE THIS ,YOUR LIFE IS IN DANGER FROM TOTAL STUPIDITY. DEE DA DEE :macho :macho :rolleyes:

[07250ex]

i run a 17 mm for the lug nuts on my 250ex, so your probably a 17 also use Snap-On and use an impact gun =p

[Sparky_20]

Originally posted by MUCUS416
IF YOU CAN'T FIGURE OUT SOMETHING LIKE THIS ,YOUR LIFE IS IN DANGER FROM TOTAL STUPIDITY. DEE DA DEE :macho :macho :rolleyes:

yeah your a jack@$$

like already stated the lug nuts are 17mm and the center nut for the hub is a 28mm

[Groves187]

MUCUS416,

Well i dont have all the sockets and i'm not going to make 20 trips to the store tell i get the right one eather!! Figured i would just ask but no there allways has to be the A** whole on here that has to say somthin dumb!


Sparky_20,

Thanks for the reply!

[07250ex]

Groves...it might cost some money but I really suggest buying tools you need them everywhere

[Honda#4]

the hub nut is a 27mm im pretty sure not 28

[Groves187]

07250ex

I am working on it, I'm young and dont have alot of money so i am buying stuff as i can, I do have a decent set of tools, just nothing that gose that big.. Guess i have never had the need tell now for somthin that big..

[400eXr1d3rZ]

Originally posted by Honda#4
the hub nut is a 27mm im pretty sure not 28

27mm Didn't work for me, I had to go into Standard sized sockets because I don't have any bigger than a 27mm.

[TYayo420]

ill go outside in a few minutes get the right size cuz i have a socket that fits my hub nut and tell you the size give me 5 mins

[Danooo1]

Hey Tyayo420,
If you have time to measure a nut surely you have time to reply back to my 10 year old son that's waiting to hear about the exhaust he paid you for.
Please PM or email dwalker@tamu.edu

[Honda#4]

Maybe your nut was a bit chewed up or somthing cus the 27mm worked perfect for me.

It's either a 27mm or a 1 3/16 standard.

[tw62t]

Tyayo420, maybe youd have time to run and ship my carb I paid for also.

[Danooo1]

Tyayo420 my son is still asking me "Dad do people steal on the Internet?, Dad I thought you told me quad people are good people" Well son most are. "I worked hard cutting grass for that exhaust Dad"
Hey Tyayo420 You ever get that nut measured? I guess your to busy counting my sons money? Refund my boy now!

[Groves187]

ok guys, Dont wanna be a dick, But this is my thread, I understand he has your money, But could you plz take it up on your own space... I would like to get the info i am asking about...

Sorry and thank you. Nick

[raptor88]

Its a 27mm