racer113
06-25-2007, 06:59 PM
I have a YFZ 450
there is only 1 hour of ride time on it
every part less than 1 hour except for the sparks exhaust and back wheels
the chassis is a 2005
It was Rath Racings mock up chassis (to build parts)
Installed is a Rath Racing Gusset Kit
the motor is a 2006 one of Rath's XC buddies
the wiring harness is pretty bare
light wiring has the block off kit, all non essential wiring bypassed (neutral safety switch,tps sensor, ect.)
There is new Maier Hot pink race cut plastic on it, If you don't like the pink I will take it off and put the brand new blue plastic on it (never ridden)
Rear axle is a RPM +4"
Curtis sparks exahust
Elka shocks with ressies up front
+2 +1 Epic front A-arms
Rath Racing Chrome Steering stem +1"(stock 06 length)
Pro taper bars
if I forgot anything ask away
there is only 1 hour of ride time on it
every part less than 1 hour except for the sparks exhaust and back wheels
the chassis is a 2005
It was Rath Racings mock up chassis (to build parts)
Installed is a Rath Racing Gusset Kit
the motor is a 2006 one of Rath's XC buddies
the wiring harness is pretty bare
light wiring has the block off kit, all non essential wiring bypassed (neutral safety switch,tps sensor, ect.)
There is new Maier Hot pink race cut plastic on it, If you don't like the pink I will take it off and put the brand new blue plastic on it (never ridden)
Rear axle is a RPM +4"
Curtis sparks exahust
Elka shocks with ressies up front
+2 +1 Epic front A-arms
Rath Racing Chrome Steering stem +1"(stock 06 length)
Pro taper bars
if I forgot anything ask away