I CANT FIND THAT GRIZZLY 700 VIDEO!! please look

[400exrider989]

the one when it first came out and it showed how to make it alot faster by just going into the speedo computer and turning up the fuel supply

my buddy got one and i want to get it working better

the video has test runs on pavement and stuff

[firefighterjosh]

Thank Nyrocatv.com for the info (http://www.nyrocatv.com/techtip.cgi?viewcat=13&viewtip=305)

Fuel adjustment -------------------------------------------------

1. With the key in the off position, Hold "Select" & "Reset" at the same time. While holding them down turn the key on. The "d IAG" screen will pop up in 5-10 seconds.
2. Press the Select button to get it to the "Co" screen.
3. Hold "Select" & "Reset" again until the "C1" screen pops up. You should see a big "0" in the top of the screen too.
4. Hold "Select" & "Reset" again until the C1 setting pops up at the lower right hand side of the screen.
5. Press "Select" to raise the number and press "Reset" to lower the number.
6. Turn the key off to reset to the new settings.
7. Restart Quad


see link for more detailed info

[400exrider989]

wow awesome thanks a bunch

[gbcap]

what are the power gains from this???

what do the numbers mean???

what have people found to work the best???

[400exrider989]

the numbers mean the amount of fuel being used into the carb body

i found that after broke in that stock should be set at around 40
slip on should be at 80
slip + air filter 120
higher than 7000 feet should be
stock around 50
slip on around 90
slip on + air filter 130

these are pretty good numbers

when you have a slip on and a air filter it gives you a 16 % pwer increase when at 120-130