PDA

View Full Version : parting out MX blaster



kicker696
06-25-2007, 01:35 PM
AS A HEADS UP, I AM LEAVING FOR CANADA THE 29th AND WILL BE GONE UNTIL THE 8th OF JULY, SO I WILL NOT BE ABLE TO RESPOND UNTIL THEN.

I have a 2001 race ready blaster that i have decided to go ahead and part out. The quad is still together, so some things may be difficult to get pics of but if you ask i shall respond
-Janssen racing 205 engine, fresh only 2 hours of break in time. The engine was completly rebuilt by janssen racing, including port and plish, along with a completly new clutch and new top end- 500

-Durablue axle-75
-LNZ long travel lobo swing arm set up for 250r shock-75
-250r carb and throttle-75
-graydon nerfs-50
-LNZ gusseted orange frame, straight, no cracks- 150
-Elka dual rate front shocks- 150
-PSI pipe- 50
-FMF silencer-25
-Turf tamer rears on stock rims, painted black-75
-AC grab bar-10
-stock front shocks- 30
-stock rear shock- 20
-stock plastic- 30
-stock a-arms- 50
-complete front brake set up- 75
-stock stem-30
-stock axle- 25
-stock front tires and rims painted black- 50
-stock rear tires- 15
-stock front bumper- 5
-2004 stock swing arm- 40
-2004 stock carrier-25
-stock rear hubs- 25
-stock seat- 25
-custom double wide foot pegs- 20
-stock gas tank (2 to choose from)-30
-Elka dual rate fully adjustable front shocks- 300
-stock pipe and silencer- 20
-complete wiring- 75

All prices are not including shipping, please ask any questions and i'll be sure to answer as soon as possible

ww228king
06-25-2007, 08:48 PM
send pics of shock to ww228king@aol.com

kicker696
06-25-2007, 09:07 PM
which shock u looking for?