250R4EVR
06-25-2007, 12:08 PM
I've built a few of these ramps and have always had great results. This Ramp was built right with no shortcuts. Ive got Close to 350.00 in Lumber and around 24 hours worth of Labor.
The Ramp Measures 6 feet wide, 14 feet long and is a little over 7 foot Tall. I have an identical ramp set up at 65 feet of Gap and its a Perfect shot for the Quad.
The Ramps 99% Together, just needs the front sides, and the Back Cover put on. (wood Included) It had a Coat of Paint to Seal all the Wood up. Ramp is Top notch and Just as Good, if not better than a Steal one.
Looking to get 425.00 for the Ramp, Its never been used and Hasn't seen a Drop of rain, Its Been indoors since Build.
This Ramp is Very Large, and Very Heavy. Will deliver a Reasonable distance just pay me the Gas money.
Ive got lots of Pics if interested. You can Call me at 586 738 1742 if interested and we can talk... Thanks for looking Evan Naber
The Ramp Measures 6 feet wide, 14 feet long and is a little over 7 foot Tall. I have an identical ramp set up at 65 feet of Gap and its a Perfect shot for the Quad.
The Ramps 99% Together, just needs the front sides, and the Back Cover put on. (wood Included) It had a Coat of Paint to Seal all the Wood up. Ramp is Top notch and Just as Good, if not better than a Steal one.
Looking to get 425.00 for the Ramp, Its never been used and Hasn't seen a Drop of rain, Its Been indoors since Build.
This Ramp is Very Large, and Very Heavy. Will deliver a Reasonable distance just pay me the Gas money.
Ive got lots of Pics if interested. You can Call me at 586 738 1742 if interested and we can talk... Thanks for looking Evan Naber