josh
10-20-2002, 04:07 PM
hey guys, i gots probs with my 91 250x, it has a unifilter with holes drilled in the top of the box, the rest stock, the thing has run absolutley great the past year, ya know, i was able to ride all day in the dunes with no problems, but now i just installed this "cobra jet" exhaust system and the bike runs like crap, i ran it in the local desert area out here just for fun and it overheated in 45 min and shut off on a high speed straight away, the guy at the counter said no jettin required with that pipe but i didn't believe him after my bike overheats so fast, so i tried goin from a 122 main to a 130 on the jet and went to a track out here to practice and ride around and about 3/4 way through the first lap it overheates and almost turns off and starts to feel like there is no compression. so i took it off the track and put a 142 main in it cuz it was still takin a while to warm up and i fig it was still lean, after i let the quad cool off i started it up with the 142 main and it sounded alot better with much better throttle response, so i took it for a lap and i got about 1/4 through the lap and the damn thing over heats and does the same thing, so i take it off and let it cool, and try to start it up to put on the trailer and the thing hardly runs at all and won't rev and sounds and feels like it's trying to stay running but has no compression.
so i think i blew the rings and piston with that new exhaust cuz it has a larger header than orig and i guess it makes the bike run a lot hotter, so does anyone have any suggestions or advice on were i could get a new piston and rings for cheap, i don't care if it's aftermarket or not, i just don't want to bore out, and i want something that will work fine and reliably, any suggest will be taken into consideration.
josh
so i think i blew the rings and piston with that new exhaust cuz it has a larger header than orig and i guess it makes the bike run a lot hotter, so does anyone have any suggestions or advice on were i could get a new piston and rings for cheap, i don't care if it's aftermarket or not, i just don't want to bore out, and i want something that will work fine and reliably, any suggest will be taken into consideration.
josh