which motor

[TheX1992]

i have a bum engine in my 250x. so its just a rolling chassis. i have 2 engines i can get to put in as a conversion.
1.) 350x
2.) Tecate 4

what do you think. i know they make conversions for 350x but me and my friend put a 750cc in a tecate so the motor is left out i think we can put a 250 in a 250 :)

what do u think

[eldoexrider01]

id measure the engines and where the pipes are gonna hafta go and see which one will be less work and do that.

[RiPPiNiTuP7]

I'd go with the 350x...

i'd go 350x if i was you, that 2 stroke aint gonna do well in a X frame

[Bean]

very true, unless its legthed and widened, powerfull motors dont like small frames, and if its a good 350x, wit the 6 gears and all, bore it to a 400, and it will be plenty fast for u

[TheX1992]

i know powroll.com sells conversion pipes and kits for the 350x so u can literally drop it in w/o cutting and welding. the tecate would be a project. it would be fast though :D

[flyin#5]

what would you do with the other motor? i have an old yamaha badger frame that needs a motor :devil

go with the 350x motor

[CHAUNCY]

maybe the 350x
It would be less work
But if the motor is messed up go with the tecate

[TheX1992]

its either or not both. old friend is a bartender that he has the 350x, friend has the tecate....

i just am tired of valves and cam's at this moment so i dont know

[OutlawEX]

Id say go with the 350X

[ryewith]

In the 250x frame I'd do the 350x conversion. Is the Tecate motor in good shape?

[redrider ex]

:D

350X will be an easier conversion..go here for some info.


http://www.atving.com/editor/racing/feature/techtip/chassis.htm

[Atreyu]

I know that the 350x engine mounts up but not sure about the tecate. The pipe on the tecate might f*** everything up. I would go with the 350x engine.

[TheX1992]

thanks alot guys i think the 350x is my final decisions. more replies than i ever would have imagined on this :)

[Sick0]

Put the 350x motor in.