need a crank!!!

[honda380]

im in the market for a new crank. needs to be a long rod. looking for a good used one for a used price. i dont ride that often so used will be fine for me. long as it has no up and down movement. oh and it must be OEM or a pro-x rebuild. no hotrods. let me know what you got. thanks, Corey

[sandspanker]

I have one out of my 88. has a pro-x rod on it. not much time on it has no up or down movement on the rod it does have a little lip on the flywheel side where the bearing rides, not sure how tight the bearing fits on that side. 75.00 + shippping.

[honda380]

did the bearing cause a lip on it or what? is there metal worn off? why did you stop running it? thanks, Corey

[norcalduner]

Ive got one sitting on my shelf and kept as a backup. It was built by Nic Granlund of CT racing with a Hot Rods connecting rod. It also has a slight lip on the flywheel side. $50 plus shipping.

[honda380]

both of these cranks will do fine, but will the lip on the shaft hurt anything? what is it from? please be honest also. Corey

[86 Quad R]

the lip that those guys mention on the flywheel side is from the seal. ya can offset the seal ever so slightly so that the seal will ride in a different location.:cool:

[honda380]

well, if its not going to effect anything, then i guess it will work. thanks