PDA

View Full Version : How do you ride a wheelie just on one back tire?



EX Stud
06-14-2007, 07:23 AM
Thanks guys... just curious so i can try it this weekend...

jokester
06-14-2007, 09:30 PM
just get onto two wheels(sideways) then put all your weight back towards whatever rear tire is on the ground then give it gas and pull.

quadriderkfx400
06-15-2007, 10:51 AM
you go about 1/3 throttle 2nd gear or 3rd gear doing a bicycle (riding on left or right side tires) then lean back and punch it and it will pop up on 1 tire its very difficult to ride them more than 20-30 feet

whiteEX
06-19-2007, 05:03 PM
like what jokester said use the bycycle method yet i have done a one wheeled wheelie out of a donut, but i have only tried that once and only succeded once

finally4fifty
06-21-2007, 08:32 PM
Originally posted by whiteEX
like what jokester said use the bycycle method yet i have done a one wheeled wheelie out of a donut, but i have only tried that once and only succeded once


Yea its hard usally i just end up on my arse and the bike on its bars !

exrider2001red
06-27-2007, 08:16 AM
ya the donut way is harder it useally happens to me when i wheelie out of a donut sometimes i lean too far one way

rooster300ex
07-04-2007, 08:47 PM
I can whip a 180 lean the right way and pull one off. And out of a dount I can easily do it. Took alot of practice. I kinna found out I could do it on accident. If ya whip it hard enough on my quad it does it usually i just gotta get on the gas.

660r2a400ex
01-17-2008, 06:30 AM
1 wheel wheelie bends axles

toddreaves04
01-22-2008, 12:57 PM
I did one the first time I rode my brother inlaws 660. I was in 2nd putt putting turning around and I bump the gas just a hair and it stood up with me on one wheel. It was the wildest feeling when your not expecting it.

660r2a400ex
01-22-2008, 01:50 PM
yea easiest way is to get it on the side to wheels, ride that for a while until your comfortable, you can do tricks in that positiion as well, sit on bars, sit on one side(i always sit on rear brake side, sit on a nerf bar, one handers, whatever, then bring it in to a wheel throwing all your wait to that one side ! get a good photagrapher cause it wont stay on one for long !

ISRIDER
06-21-2008, 06:53 AM
its not hard..

fisrt u ride like this:


http://img95.imageshack.us/img95/7167/dsc08499yy6.jpg


and then u pull a wheelie:

http://img440.imageshack.us/img440/3987/dsc08511vt0.jpg

Sanddraging28
03-22-2009, 10:32 PM
VERY VERY VERY VERY bad for a motor......starves the bearings for oil....i know this first hand....also bends axles

pit/wood
06-22-2009, 09:50 AM
you cant ride on one wheel and control it for more than a few feet. Let me find the vids we took of it.

I even made a full width grab bar to stand on.