how do i change the gear oil?

[Brian_1010]

i just got a 450r and im not sure how to change the gear oil in it?

[warriorxcr1]

there should be a bolt right by the brake lever to drain it. take the screw (located above lever if i recall correctly) out as well.

when the old stuff is out, put the drain bolt back in and leave the screw out. then pour the new oil into the spot where the cap is. when oil starts to flow out of that spot where the screw was you have enough. put the screw in quickly.

run the engine and check/open the screw again to see if oil pours out..... if it does your set!

the manual has a better detailed account of this with pictures. hope this helped.

-ant

[Brian_1010]

thanks alot