cooling problems

[71_400TRX]

after my last race i noticed that my coolant was running a little bit below the lower line but when i open the cap to add some it was up to the top. another problem i have that could be related maybe is my fan isn't turning on. i do have the pro-armor kill switch installed and removed the key and i have heard when doing this sometimes the fan will stop working. any suggestions would help before this weekend. thanks

[bigz-71]

make sure that when you removed the key your ignition is set to run. Your fan does not come on until the motor get really hot, i know it takes mine a while. The best way to test it is let the bike idle in your garage (with the door open) and use a temperature gun to measure the temperature. I think it comes on at 200 or something close to that.

You need to splice the red and black wires from the key switch together to make the fan work.