A-arm bushing removal

[250Renvy]

Pappy, just wondering if you have any tips to remove the bushings from a set of Laeger a-arms. I want to get them powdercoated but everything has to be removed first.

I have a set that has both the old style red bushings and the newer delron but they seem a bit seized in there.

[Pappy]

some spray lube, a punch or socket, flat-bade screw driver etc and drive them out. if they are tat bad then trying to be gentle can be thrown out the window :p on ones that bad, we usually coat the bushings with PB Blaster and let them soak, and then try to remove them, sometimes we use a press etc worse case, we break out a torch