aaronvan
06-02-2007, 04:38 PM
I'm looking for a little help here if you guy's don't mind.I recently bought a '86 trx 250 with a dissasembled carb.I reassembled as well as I culd figure but it has a few troublesome problem's.
1st-It starts fine when cold,but after about 15 min's of riding it takes quite a bit to restart.
2nd-I noticed when watching my wife ride it,it blows a fair bit of black smoke when she honks on it.
3rd-when letting completly off the gas(when warm)it sounds like it wants to die,but never acually does.
I dont have a manual for the bike and I am not in a position to get one at the moment,is there a site that has a diagram of this carb when assembled,I want to make sure I have the lines in correct spot's.
The carb is clean and the jet's are fine,I think it just needs to be set up properly and I have no clue on how to do it,so any advise would be great.
oh ya she burns gas like a friggin jet plane3hrs of reasonable riding to a complete tank.One more thing,it wont run with the air filter on,it dies right away.
thanks again
Aaron
1st-It starts fine when cold,but after about 15 min's of riding it takes quite a bit to restart.
2nd-I noticed when watching my wife ride it,it blows a fair bit of black smoke when she honks on it.
3rd-when letting completly off the gas(when warm)it sounds like it wants to die,but never acually does.
I dont have a manual for the bike and I am not in a position to get one at the moment,is there a site that has a diagram of this carb when assembled,I want to make sure I have the lines in correct spot's.
The carb is clean and the jet's are fine,I think it just needs to be set up properly and I have no clue on how to do it,so any advise would be great.
oh ya she burns gas like a friggin jet plane3hrs of reasonable riding to a complete tank.One more thing,it wont run with the air filter on,it dies right away.
thanks again
Aaron