YFS426 Hybrid pic

[pb_paulie_b]

It's a 2 stroke! It's comming along nicely and I thought you guys would like to see a funny pic :D
http://i31.photobucket.com/albums/c387/pb_paulie_b/IM000829.jpg

[korniev]

Insane!!! Is it the YFZ rear shock?

[pb_paulie_b]

Yup. They are all YFZ shocks.

[bubsyfz450]

is that in your house?

[TRUE]

Gonna be awesome!
HybridRiders.co.nr

[pb_paulie_b]

Thanks guys!


Originally posted by bubsyfz450
is that in your house?
Gottah better way to get from the love seat to the couch :D

[Slash1869]

doesn't the yfz450 rear shock use linkage????
Is it ok to not have the linkage setup??

[pb_paulie_b]

Yeah it uses one. I don't need/use one on my quad.
http://i31.photobucket.com/albums/c387/pb_paulie_b/DSCF3469.jpg

[Slash1869]

does that effect performance on the shock??
I have a blaster and i was gonna put on yfz shocks all round, im probably gonna use a plus 3 or 4 swing arm so that linkage isn't needed??

[pb_paulie_b]

The YFZ shock in the rear will definitely make the rear of the quad sit higher. So I guess it depends on where you ride. MX, Dunes , trails, or mud. Only on trails or mud would you want the rear that high. This is of course my opinion. Performance wise it's a good alternative to expensive aftermarket shocks.
Here's a pic of the old set-up with the added weight of the motor. It does make a little difference.
http://i31.photobucket.com/albums/c387/pb_paulie_b/DSCF3026.jpg

[Slash1869]

yea yfz shocks are a lot better than blaster shocks and the blaster looks small anyway so i guess the added height would look better make it look like more of a bigger quad. do you know how much it raises it??? like 3 inches or so????
for the front you would help a lot if you could take a picture of the front shocks and how u mounted those on that would be much appreciated if you could take an up close pic and post it

[Slash1869]

by the way.... your quad looks sweet

[pb_paulie_b]

Not sure. I don't know how high a stock one is. A can tell you that mine sits about 9 1/2 inches off the ground fully dressed...PB
http://i31.photobucket.com/albums/c387/pb_paulie_b/DSCF3257.jpg

[pb_paulie_b]

Originally posted by Slash1869
by the way.... your quad looks sweet
Thanks man :D

[Caseys 300ex]

Can you show us more pictures of different angles of the quad. Also what size are your tires? I love the quad!:cool:

[mx825]

that is CRAZY awesome.

i'm speachless.

[2muchquad]

Hows that thing run?thats what i want to know..:D

[pb_paulie_b]

Originally posted by Caseys 300ex
Can you show us more pictures of different angles of the quad. Also what size are your tires? I love the quad!:cool:
I'll show just one more pic only because I don't want to spoil the pics with the motor installed ;). The fronts are 22x8x10's and the rears are 22x12x8's.
2muchquad: There's no motor in it yet (PB prepares for some ball busting :))
http://i31.photobucket.com/albums/c387/pb_paulie_b/DSCF3493.jpg

[pb_paulie_b]

http://i31.photobucket.com/albums/c387/pb_paulie_b/DSCF3535.jpg
http://i31.photobucket.com/albums/c387/pb_paulie_b/DSCF3536.jpg

[Caseys 300ex]

God thats sweeeet! :blah:

[pb_paulie_b]

Got the exhaust, carb, and chain hooked up. She running very lean, to the point that I'm not going to ride again untill the new carb gets here...PB
http://i31.photobucket.com/albums/c387/pb_paulie_b/77777.jpg

I added 6 links to the chain.
http://i31.photobucket.com/albums/c387/pb_paulie_b/DSCF3567.jpg

It's tight but it's all in there.
http://i31.photobucket.com/albums/c387/pb_paulie_b/DSCF3563.jpg

[2muchquad]

Man that looks sweet.If you could pick up a carb from a 89 to 94 yz250,it may work well for you.I say those years because i had a 90 carb on the it400 motor a while back and it was really easy to set up and tune.Plus it started without drama.looks good,i may build snother blaster later with the vintage 490 i have,hmm...;)

[pb_paulie_b]

I already bought a Keihin 39mm PWK, just waiting for it to get here.
Awww man a 490 Blaster would be sweet done right. If I remember right you said you had it tuned good too!