PDA

View Full Version : Motion Pro Twist Throttle



Thumper9489
05-29-2007, 07:39 PM
Okay so this past weekend i began putting my twist throttle on my 02 blaster and for some reason now its not running right..do i need the idle kit or does anyone no what going on with this?

honda450rider33
05-29-2007, 08:45 PM
you have to buy a tors removal kit with and idle install kit try vitos performance, there are ways to jerryrig it but i would not do it i would do it right

Thumper9489
05-30-2007, 03:27 PM
Thanks do you know if they are a hard install

honda450rider33
05-30-2007, 05:27 PM
i dont know i have never installed one but if you call vitos i am sure they will be able to tell you more and how hard they are to install

85and93
06-01-2007, 12:35 PM
all i know is that my dad put one on my bike and they are very hard to get use to. i went into the turn and was really hard to get off the gas.

85and93
06-01-2007, 12:37 PM
but i took it off the day after i had it. lol

woodsracer144
06-03-2007, 08:35 AM
if you have your tors removed make sure the little box up front under the nose its out too... theres a wire that runs from the stock throttle houseing and goes up there...
when you start it up if you twist the throttle will it stay runing, if its something with the tors it will die out when you let off the gas, get a vid of what it sounds/ runs like with it... hope that helped