PDA

View Full Version : Fasstco Flex Bars


250RXCrider
05-29-2007, 07:00 PM
Just wondering what bend flexx bars you guys are running? I have a +1 stem and have been running CR high pro tapers for years I am trying to find a height close to that. It looks like it would be either the 14 degree Quad racer bend or the 14 degree Quad racer low. Thanks!:D
450R22
05-29-2007, 08:13 PM
I don't have a +1 stem, but i am running 14 degree quad bend, and am very happy with the ht. I am about 5' 9"
quad janern
05-30-2007, 12:22 AM
im wondering about the fasst flexx bars too.

what elastomer density do you mx riders use most ?
250RXCrider
05-30-2007, 07:10 PM
Originally posted by 450R22
I don't have a +1 stem, but i am running 14 degree quad bend, and am very happy with the ht. I am about 5' 9"

Thanks for the input:)
MAD450r
06-01-2007, 01:58 PM
On a stock stem with 1 inch riser to convert to the larger diameter bars.

I run the yellow elasters. When standing still on the atv they feel way to loose but when in the roughest sections on our local track I love them being so forgiving.
Dave400ex
06-01-2007, 02:47 PM
I have a +1 stem and 14 degree, but I'm not sure what the bend is. They are pretty low though. I want to get a +2 stem.
250RXCrider
06-01-2007, 05:10 PM
Originally posted by Dave400ex
I have a +1 stem and 14 degree, but I'm not sure what the bend is. They are pretty low though. I want to get a +2 stem.

I talked to Fasstco and there is an easy way to tell if the they are the low bars or the high bars. If the bolt that goes through the elastromer if exposed on the inside to hold with an allen wrench then it is the tall bar. If the bolt is radius cut into the handle bars then you have the low bars.