PDA

View Full Version : 06 Wolverine 450 wont run?????



john.E.business
05-27-2007, 09:38 AM
I will get more details when needed but for now this is the scenario, the machine will fire but needs the choke on to run when you give it some throttle is just cuts out and dies, this machine has about 680km on it and hasn't had any prior issues and i don't think the jetting would all of a sudden be outta whack? any other ideas?

STooK02780
09-21-2007, 08:28 PM
i have the same problem right now with my raptor, check my posts and you'll see what i got for responses.

jcooksey
02-11-2009, 02:51 PM
I would say you should probably check for plugged jets.

hondariderdylan
03-03-2009, 01:05 PM
take it to the dealer and get them to clean the entire fuel system and check the ignition system
unless you can do it yourself

SRH
05-05-2009, 06:21 PM
dirty carb

howlnhusky
06-14-2009, 08:27 PM
I got the exact same problem with my 07 Wolverine 450 4x4.
Runs fine on choke, turn it off and within 20 seconds stalls right out but if I jump on the throttle it is fine.

SRH
12-05-2009, 08:12 PM
dirty carb, or bad fuel