Post your Outlaw Pic

[Eddie11gt]

Lets post those Outlaw pics, so all the visitors know what they will be up against.

[eerhard09]

Great duner!!!!

http://i3.photobucket.com/albums/y71/mre2u84/OMRSL07/Outlaw_Parkinglot.jpg

[Eddie11gt]

OUTLAW 525!!!!!!!!!!!!!!!

[Eddie11gt]

KTM POWER!!!!!!!!!!!!!!!!

[Eddie11gt]

I LOVE MY OUTLAW!!!!!!!

[OutlawBill]

http://members.cox.net/bills500/FV525.jpg



My 525 in the dunes

[GE4x4]

Only the 500, but waiting on a 08.:macho

[MentalState]

:)

[thunderwolf]

2007 BITD Bluewater Ironman Amateur Winning Outlaw525

(before)

[thunderwolf]

during

[thunderwolf]

After

[OutlawBill]

Thunderwolf what size tires are you using

[thunderwolf]

22" rear 23" front, stock gearing Gps at 77 mph pavement and 72 mph dirt. It still could go higher in the gearing I just don't know if I need it.

[bsieren]

Outlaw Rules!!

[eerhard09]

Originally posted by bsieren
Outlaw Rules!!

bsieren, did you put the HMF on right away or did you rejet it and run with the air box lid off for a little bit before the pipe? If you have a comparison, what did the HMF do for performance and for noise levels? Also, what were the jetting differnces with the JD kit between the stock exhaust and the HMF? I have the same setup as you and am contemplating an hmf slip on. I just do not know if it is worth it over the stock exhaust being open or if it is just looks that will improve.....

[eerhard09]

Double post....

[bsieren]

I put the pipe on right away and rejetted. Performance wise I rode it around for a little bit with the stock set up and it was ok, but not near as snappy as it is now with the pipe and rejet. By the way I have the airbox lid off also. As far as jets, the stock one is 148 and I am running 172 with the red needle on the 3rd position with the JD kit.

Noise wise the HMF is a lot louder than the stock. IMO the HMF, rejet and no lid is well worth the extra snap and overall power increase that it gave it.

Can't wait until UNI or K&N come out with a filter and outerwear for this to let it breath a little better yet.

[Evasiveone]

Pro design with a K&N is out now.
Pro design filter (http://cgi.ebay.com/ebaymotors/Pro-Design-Pro-Flow-KN-Intake-Kit-Polaris-Outlaw-525_W0QQcmdZViewItemQQcategoryZ43979QQihZ002QQitem Z120126031015QQrdZ1QQsspagenameZWDVW)
Mine will be here tomorrow.

I am waiting to see what the Muzzy exhaust will be like. It should be out in a little over a month. They are doing R&D right now on the 525.

[TWISTED DINLI]

Originally posted by MentalState
:)

thats awesome:eek2:

[LT250_JOE]

AS SOON AS MINE IS BACK FROM DEALER, I'M THINKING ABOUT THE PAUL TURNER/ FAT BOY STAGE 1 KIT. LOOKS SICK, HAS VERY LONG DUAL PIPES OFF HEAD. I LIKE TO BE DIFF, EVERYONE RUNS HMF( I KNOW THEY ARE GOOD). WOULD LIKE TO SEE DYNO CHARTS ON FAT BOY SYSTEM VS HMF.

[X_Da_C]

Heres mine.
http://i8.tinypic.com/6co0b9u.jpg
http://i8.tinypic.com/66jy4no.jpg

[motohed]

Hey X_Da_C
I have to compliment you on the cool front fenders nice job overall . You and mental state both have killer looking units as do all I am still in the process of getting my just right to post it will be killer also I am waiting for my stadium suspension and some other trinkets all these quads should be applauded.:macho

[67mopar]

hey X_Da_C nice lookin bike, is really street legal? also r those ds650 fenders, and ya might want 2 get some torks for the rear. lol

[X_Da_C]

Yes its street legal and yes they are ds fenders. I thought about the torks for the rear but i might end up just going for beadlocks since the rear end is wider than the front and i always slam into rocks.

[LT250_JOE]

Originally posted by MentalState
:)


WAS THAT YOUR QUAD IN THIS MONTHS ATV ACTION?

[MentalState]

yes it was....:D

[LT250_JOE]

YOU DA MAN:macho

[MentalState]

LOL its for slae... :)

check classifieds...

[Arnj85]

2nd day

[Arnj85]

Out with the 03 kfx, thought id have a little fun with it

[525 Outlaw Dude]

hows it handle

[Arnj85]

Like a turd smells! 22's dont like to spin especialy when each wheel weighs 70lbs

[525 Outlaw Dude]

cool, and i like your prefix "like a turd smells":huh :confused:

[LT250_JOE]

TRIPLE THREAT!!!!:mad:

[bossman525]

here is me and my partner in crime at our local dune

[bossman525]

sitting there waiting for the temps to get lower than 95 degrees

[525 Outlaw Dude]

pretty cool pic, you can say its Light Vs. Dark

[honda450rider33]

Originally posted by Arnj85
Out with the 03 kfx, thought id have a little fun with it

was that i dirtwheels

[obzidian]

Just picked this one up. Got it for $6700.00 plus frieght!!

http://i101.photobucket.com/albums/m50/obzidian/Our%20Polaris%20Family/Picture003.jpg

and this past Saturday it finally saw some dirt! Well, mostly about 6"-7" of water and mud than dirt!!

http://i101.photobucket.com/albums/m50/obzidian/Our%20Polaris%20Family/DSCF0134.jpg

http://i101.photobucket.com/albums/m50/obzidian/Our%20Polaris%20Family/DSCF0133.jpg

http://i101.photobucket.com/albums/m50/obzidian/Our%20Polaris%20Family/DSCF0130.jpg

http://i101.photobucket.com/albums/m50/obzidian/Our%20Polaris%20Family/DSCF0131.jpg

http://i101.photobucket.com/albums/m50/obzidian/Our%20Polaris%20Family/DSCF0159.jpg

I think i need to get some better tires for this type of trails? Anyone recommend the mudlite SP's but in a 23" 22" setup? I want to get a bit more, not much to kill the handling and acceleration, clearance. Besides the SP's, what would ya'll recommend?

OH, and some riding gear!!

[525 Outlaw Dude]

all around there a good tire, i had them on my 525 when hunting season came and they worked wonders in rough terrain, and muddy conditions like yours.;)

[obzidian]

Originally posted by 525 Outlaw Dude
all around there a good tire, i had them on my 525 when hunting season came and they worked wonders in rough terrain, and muddy conditions like yours.;)

thanks! I wasn't sure if i want to go with a larger set of GNCC or RAZR's or a dedicated mud tire like those. What i'm looking for is a tire that will cut through the water well.

[a_garrett82]

http://i171.photobucket.com/albums/u293/a_garrett82/CopyofIMG_1185Medium.jpg

[LT250_JOE]

STUCK!!!

[M0n5t3r]

Hey obzidian was that aa motorsports in miami and also was that a big cypress sticker on your bumper?I didnt think sport bikes would pass the inspection by the rangers.IF so this would be kool cuz we goto bear island unit alot and it has some nice areas to ride.

[Eddie11gt]

Ocotillo Wells

[FReEK]

450
http://img.photobucket.com/albums/v378/GodspeedFReEK/IMG_0791.jpg

[67mopar]

Originally posted by FReEK
450
http://img.photobucket.com/albums/v378/GodspeedFReEK/IMG_0791.jpg
how do u like ur 450? have u noticed any flaws or things that have gone wrong?

[FReEK]

So far so good.

[pred174]

have u really gotten a chance to compare it to any other 450's

[FReEK]

Noy yet hopfully this weekend though.

[Ed Canvasser]

Pismo Beach... mid-week, had the place to ourselves!!

[outlaw11]

heres mine had to order a new bumper cuz i broke my other one

[outlaw11]

another

[tmfracing]

MentalState that is a sick quad. Could you post what mod's you have made? I doubt it, but is it still for sale? If, so how much?

[outlaw450mxr]

http://i6.tinypic.com/8fjwowh.jpg

http://i19.tinypic.com/6xkdce9.jpg

http://i15.tinypic.com/86pw7xi.jpg

http://i15.tinypic.com/6y5nzhw.jpg

http://i13.tinypic.com/6jybc6a.jpg

http://i19.tinypic.com/6k9jyvq.jpg

http://i11.tinypic.com/8ejt6hx.jpg

[OutlawBill]

New look for my 525

http://members.cox.net/bills500/new-look.jpg


http://predatorowners.com/memberphotos/predator/14979/new-rear-view.jpg

[thelittlefrench]

very nice!!
Please, what is your a arms? which is Fox evol shocks lenght?

[thelittlefrench]

rath racing? are they a arms long travel?

[OutlawBill]

Originally posted by thelittlefrench
rath racing? are they a arms long travel?

no they use stock length shocks

[erac4019]

Here is willb's 08 525irs. He just got the AC nerfs and bumper on yesterday and he has an Alba anti vibe/ProTaper clamp and bar set up but the Pure Polaris/Cycra handshields are still on back order. He also has an HMF pipe, JD jet kit and Maxxis RAZRs yet to install...oh yea, he also only has about 4 1/2 minutes on it since he picked it up, literally maybe 5 :confused:
http://i120.photobucket.com/albums/o169/RoscoeCoalTrain/Picture015.jpg
http://i120.photobucket.com/albums/o169/RoscoeCoalTrain/Picture017.jpg

[FReEK]

Update pic. Got a few mods. nerfs, cheaptires and itp baja wheels rear,tires front. getting front wheels and barsw/handguards soon.

http://img.photobucket.com/albums/v378/GodspeedFReEK/IMG_1002.jpg

[outlaw525s]

i am on my qade

[outlaw525s]

more

[outlaw525s]

more

[Eddie11gt]

MY 07 Outlaw

[OutlawBill]

What size are your rear tires?

[Eddie11gt]

20x11x9

[outlawjeff]

how do you like your ct pipe? i am thinking of getting one and was wondering how loud and how much power increase you noticed. thanks

[BikerTrash05]

Before anyone asks, those are MudLites on Pred rims, and before the new MudLite sport tires. And for some reason, the tires developed different shapes, as in one is rounder, and one is flatter. I want black rims and the new MudLites all around.
http://pic20.picturetrail.com/VOL1600/815976/5189276/234969968.jpg

[400exrider_ed]

Bikertrash have any pics from the back? I'd like to see how those Predator rims look sticking out.

[Eddie11gt]

I love the exhaust. It’s loud but not as loud as my brothers FMF 4.1 for his Outlaw. At idle is has a nice deep tone and power was a big noticeable difference. I’m very happy with my purchase. Ct racing makes a great product and Allen is helpful, give him a call. I’m lucky I live 15 min away

[outlawjeff]

thanks for the info

[BikerTrash05]

Sorry, no pic from the back. They didn't stick out too far, and I had no problem sliding around in the snow.

[mattg324]

god damnn. hahaha. guys i have to say that those quads are the HOTTEST i have ever seen. like i just wanna stick my meat in the exhaust. jk. but they are soooo nice. where do all you live, i need some riding

[Rig]

Is it summer yet?!?!...

[Rig]

You really can't tell I'm on my 525, but yes thats me leading the pack up Choke...

[bossman525]

Originally posted by Rig
You really can't tell I'm on my 525, but yes thats me leading the pack up Choke...
damn that hill looks like fun

[cam2010]

hey x_Da_C great quad thats the best outlaw i have seen and the ds fenders really top that off great job.:)

[mattg324]

hey Rig, where is that?

[OutlawBill]

desert racing set up

[smokinwrench]

Bill, I'm just wondering. Do you even ride your other quads since your 525 is set up so sweet? I know if it were mine I would never ride the others.

[OutlawBill]

still ride my DS in the sand

[Rig]

Originally posted by mattg324
hey Rig, where is that?

It's St. Anthony in Idaho. I'm lucky enough to live about 30 miles from them!

[525 Outlaw Dude]

this is were me and my buddys ride!!! and OutlawBill how do you like your Fox Shocks Set-Up?

[525 Outlaw Dude]

this is the jump we made this tuesday

[willb]

You guys are killing me. The weather has sucked all winter. Usually we get a few rides in but tonight we are expected to get record lows and then I got to fly to Chicago for business for the next 5 days.

Have fun be safe.

[mrcarson2590]

my new 08' 525 S

[SSJEFF]

Heres mine.
http://i246.photobucket.com/albums/gg101/outlawjeff/2w6rts4.jpg
http://i246.photobucket.com/albums/gg101/outlawjeff/30ht21e.jpg
http://i246.photobucket.com/albums/gg101/outlawjeff/357k9iq.jpg
http://i246.photobucket.com/albums/gg101/outlawjeff/07OUTLAW525LE/22nov2007a760pix.jpg

[natemxz600]

ssjeff and outlawbill,did you guys go directly through fox and custom axis? or did you buy used and make them fit? nice bikes by the way too:cool:

[SSJEFF]

Originally posted by natemxz600
ssjeff and outlawbill,did you guys go directly through fox and custom axis? or did you buy used and make them fit? nice bikes by the way too:cool:

I got mine used from a former polaris pro rider. Bill got his new, can't remember who from though.

Custom axis has air shox also now. I saw them at the indy show.

[Outlaw 50]

what the..........Jeff that is one seriously fugly quad, talk about no character...where is the color? white...you can't even see it in the snow ......man i can't believe you posted pics of that boat anchor on the board.....whew...the nerve of some people!

























Hehehe....just kidding but I'll bet I had you going....lol

Oh yeah, nice lookin' quad!http://i29.tinypic.com/ok20df.gif

[SSJEFF]

Originally posted by Outlaw 50
what the..........Jeff that is one seriously fugly quad, talk about no character...where is the color? white...you can't even see it in the snow ......man i can't believe you posted pics of that boat anchor on the board.....whew...the nerve of some people!







Hehehe....just kidding but I'll bet I had you going....lol

Oh yeah, nice lookin' quad!http://i29.tinypic.com/ok20df.gif

Someone do something about this guy and his little smiley faces lol. JK.

[TRENT_G]

Here's mine with my sport bike. sports bikes for sale :D

[sheriff525]

Me at St Anthony's. Me, my dad and brothers are going again April 21-28. We all have 525 IRS 2007

[jdm197]

here is my 2007 irs
http://i179.photobucket.com/albums/w290/jdm1974/008.jpg
http://i179.photobucket.com/albums/w290/jdm1974/007.jpg
http://i179.photobucket.com/albums/w290/jdm1974/006.jpg
http://i179.photobucket.com/albums/w290/jdm1974/005.jpg

[Outlaw 50]

Nice quad, is that a Corbin seat?

[jdm197]

yes it is. no more slop in the seat. it fits really good

[CHADHIX]

Here are a few pictures from today.

[CHADHIX]

2

[CHADHIX]

3

[pattersondp]

chadix what size rear tires should i go with i have a 06 500 outlaw and the rears are 20-10-9 can i change that size with the stock rim:devil:

[willb]

Looking real good Chad. Can't wait to see it up close when I stop down. Good luck with the season.

[Evasiveone]

My friend has a sign business and we came up with these graphics for myself.

'07 Outlaw 525 IRS


http://i127.photobucket.com/albums/p123/Evasive1/525graphics002.jpg

http://i127.photobucket.com/albums/p123/Evasive1/525graphics001.jpg

http://i127.photobucket.com/albums/p123/Evasive1/525graphics003.jpg

[erac4019]

Hey willb, dont we have a friend with a sign business too??? Can Matt do graphics like those??

[Eddie11gt]

Outlaw 07 out for some sun......

[eerhard09]

Still need to put some powder on the wheels yet but since I got it cleaned up, I figured I would post some pics. Stuff added over the winter:

HMF
EHS Air box lid
powdered the A-Arms, bumper, nerfs, grab bar, and heat shield
Ceramic coated the header (need to do the mid pipe yet)
Put on the Pure Polaris gripper seat cover
Have new rear tires but have not mounted them....

http://i3.photobucket.com/albums/y71/mre2u84/DSC01693.jpg
http://i3.photobucket.com/albums/y71/mre2u84/DSC01695.jpg
http://i3.photobucket.com/albums/y71/mre2u84/DSC01696.jpg
http://i3.photobucket.com/albums/y71/mre2u84/DSC01699.jpg

[SSJEFF]

I like that seat cover. Did you have them add anything to the seat foam to get the valley out of it?

[eerhard09]

No, I thought sbout doing that but just decided that I didn't mind the valley. I did slide up a little with the stock cover but this cover is so tacky that once I am sitting on it, I do not move!

[BikerTrash05]

Nice! Are you going to powdercoat the rear arms, too? I was thinking my outlaw needed more black too, but haven't done much about it yet. :p

[FReEK]

Got my Black side panels in today. Looks Okay?

http://img.photobucket.com/albums/v378/GodspeedFReEK/IMG_1107.jpg
http://img.photobucket.com/albums/v378/GodspeedFReEK/IMG_1106.jpg

[eerhard09]

Originally posted by BikerTrash05
Nice! Are you going to powdercoat the rear arms, too? I was thinking my outlaw needed more black too, but haven't done much about it yet. :p

My brother asked me the same question since I did the fronts. But, for some reason I do not mind the aluminum a-arms on the back, unlike the silver painted fronts. Not sure why I feel that way though, can't pinpoint it.... The last thing I want to do if PC the wheels, at least my sand rims.... I don't want to do the stock rims because I would like to replace those with HiPer's anyway. That will probably be my next big purchase since I do not mind the stock shocks (for now). After the Hipers I will get the stock shocks rebuilt my GT Thunder and that will be it for a while....

[outlaw450mxr]

Originally posted by FReEK
Got my Black side panels in today. Looks Okay?

http://img.photobucket.com/albums/v378/GodspeedFReEK/IMG_1107.jpg
http://img.photobucket.com/albums/v378/GodspeedFReEK/IMG_1106.jpg

no offense bro, but that looks really bad with the black sides. And you have to take care of your bike better, the whole thing is rusting already.

[outlaw450mxr]

Originally posted by FReEK
Got my Black side panels in today. Looks Okay?

http://img.photobucket.com/albums/v378/GodspeedFReEK/IMG_1107.jpg
http://img.photobucket.com/albums/v378/GodspeedFReEK/IMG_1106.jpg

no offense bro, but that looks really bad with the black sides. And you have to take care of your bike better, the whole thing is rusting already.

[outlaw450mxr]

Originally posted by FReEK
Got my Black side panels in today. Looks Okay?

http://img.photobucket.com/albums/v378/GodspeedFReEK/IMG_1107.jpg
http://img.photobucket.com/albums/v378/GodspeedFReEK/IMG_1106.jpg

no offense bro, but that looks really bad with the black sides. And you have to take care of your bike better, the whole thing is rusting already.

[FReEK]

Not rust BRO , Mississippi red clay/sand and thanks for your opinion

[outlaw450mxr]

Originally posted by FReEK
Not rust BRO , Mississippi red clay/sand and thanks for your opinion

o my bad, you have to admit it looks like rust though. and i didnt mean to post that like 3 times, my computer was just being gay and did it, so sorry about that.

[FReEK]

No biggie:)

[rgasper33]

Thats I lil different freek. I would probably go back to white though. Just my opinion though. Its not that bad, just somethin about it doesnt seem to flow right...

[TheOutlaw]

I like the red and black just fine. I am trying to picture what it would look like reversed though. Either way, yeah, the first thing I thought was, holy look at that rust! haha.

[SSJEFF]

I don't think it looks bad with the black sides Frek. It took me a while to get used to ther white when they came out to bew honest. It reminds me of my 05 red predator if I had black wheels.

[sheriff525]

http://www.youtube.com/watch?v=6DjBoQFsFCc
Here is a video clip of our trip last year to St Anthonys Sand dune. We were just finishing for the day!

[sheriff525]

http://www.youtube.com/watch?v=mljqXUpItvY

[#17TBoneRacing]

2007 525 IRS.

http://i267.photobucket.com/albums/ii308/CIkraB/IMG_1854.jpg

http://i267.photobucket.com/albums/ii308/CIkraB/IMG_1852.jpg

http://i267.photobucket.com/albums/ii308/CIkraB/IMG_1851.jpg

[willb]

My new DWT Team beadlocks and razr tires courtesy of chadhix and Stephanie Parton

[willb]

2

[eerhard09]

Nice Will! Now, where did you say you got the beadlocks for the rear? What did they run you, if you don't mind me asking?

[tldPREDATORboy]

Originally posted by outlaw450mxr
no offense bro, but that looks really bad with the black sides. And you have to take care of your bike better, the whole thing is rusting already. dude its called clay not rust there ghenius.i brought the pred to south carolina and after one ride my pred was worse then that.

[outlaw450mxr]

Originally posted by tldPREDATORboy
dude its called clay not rust there ghenius.i brought the pred to south carolina and after one ride my pred was worse then that.

He already told me that, genius ;)

[#17TBoneRacing]

Originally posted by willb
My new DWT Team beadlocks and razr tires courtesy of chadhix and Stephanie Parton

Those look great! What is the size and offset on the rears?

[SSJEFF]

There are more Geniuses on this site than that worked on the atom bomb lol.

[OutlawBill]

duh i are 1

[willb]

No worries Bill, we still love ya. Offsets are stock. They are about 46 now. I have a set of new baja's left over that will fit the front. I am working on a set of Gallagher hubs to suck in the front.

Chad runs alittle more narrow maybe a 1/2 to 3/4 inch more. That is about as far you can go without hitting the sway bar down tube.
Steph got these when she was with Team Polaris. Got to see her. Very Nice...

Fit and finish is perfect. Why Douglas doesn't sell them to us direct yet??:confused:

Price: Bill I dont want to upset ya.
:D

[TYLER329]

I still have one set of Gallagher hubs in stock if you want them.

[OutlawBill]

New look still have parts coming

[spanky101]

looks great! who makes that hood?

[OutlawBill]

Performance Carbon Products You got to call and leave a message he will call back.

http://www.pccarbon.com/

[outlaw450mxr]

hey Outlawbill,
ive got the 450, if you havent guessed that, but i was thinking about getting lonestar long travel a arms and some fox floats, but ive never riden anything with floats. are they really soft? My friend has a yfz with custom axis and my brother in law has a kfx400 with custom axis and i love the way both ride(suspension wise) they soak up any bumps and are so much smoother then my podium x's. But i would rather have floats, so how do they ride?
thanks.

[OutlawBill]

Originally posted by outlaw450mxr
hey Outlawbill,
ive got the 450, if you havent guessed that, but i was thinking about getting lonestar long travel a arms and some fox floats, but ive never riden anything with floats. are they really soft? My friend has a yfz with custom axis and my brother in law has a kfx400 with custom axis and i love the way both ride(suspension wise) they soak up any bumps and are so much smoother then my podium x's. But i would rather have floats, so how do they ride?
thanks. I like the the faster I go the better they work for me

[willb]

Bill and the stealth look. Your not to anything naughty are you?;)

Need to change the white cycras>>>>>>

[LT250_JOE]

Originally posted by OutlawBill
New look still have parts coming

A red led bar across the front and it'd be the new night rider!!!

Stealth look is awesome. nice ride!!!

[spanky101]

bill, we need more pictures of this beast!

[OutlawBill]

#graphic kit should be in later this week and I plain too cut some of the front fenders off some thing like this
http://www.atvriders.com/gallery/2008-worcs-02-open-atv-photos/images/4J7W1412.jpg

[TYLER329]

Here is my 2007 Outlaw 525 IRS. It is pretty much done and ready for the 2008 Iowa ATV Harescramble Series accept for Flexx bars, carbon hood, and hand guards.

[TYLER329]

one more

[TYLER329]

last one...

[ds450maniac]

Nice Outlaw Tyler

[OutlawBill]

I like the Camouflage graphics . What air pressure due run in you Fox Evol's

[SSJEFF]

Tyler,
are those floats all the way around? More pictures man! Nice outlaw.

[TYLER329]

No, they don't make EVOLs for the rear, they only tried it on Eichners bike and they won't sell them to me......yet. As far as pressures go, I haven't had time or weather to be able and go out and dial the fronts in. The front mains are at about 45LBS I think. I will have the whole Gallagher sway bar set up by the end of the week. This is the .120 wall chromoly sway bar and aluminium adjustable links. I will have more pics up after the carbon fiber nose, flexx bars and the Gallagher sway bar stuff. Here is one more pic.

[SSJEFF]

I posted my last post in between you pictures. Awesome quad.

[spanky101]

butlers bike is lookin sick! thats a nice cut. Are irs and SA plastics interchangeable? I realy wanna all black 450 mxr haha

[SSJEFF]

All the outlaws use the same plastics, IRS and SRA.

[spanky101]

thats good to know! Thanks man! Anyone know what a set of plastics runs oem?

[TYLER329]

PM me and I'll give anybody a good price on Outlaw plastics or any other Polaris parts for that matter.

[OutlawBill]

I might go black white black since I work at the SDPD HQ :rolleyes: :D

[spanky101]

haha black fronts and white backs would look cool! Haha there goes that idea!

[thelittlefrench]

mine 450 from France!:)
Wait for 3 Elka elite shocks, PC carbon Hood, rear 8" wheels and FMF Q4 slip on.

[thelittlefrench]

.

[thelittlefrench]

.

[thelittlefrench]

.

[thelittlefrench]

.

[outlaw450mxr]

what kind of a arms are those?

[thelittlefrench]

It is a French manufacturer called "TBS";)
I have a sponsorship contract with him and also Rath racing.
But TBS lives at 30 miles from my home.

http://tbs-quad-evolution.monsite.wanadoo.fr/page2.html

[pattersondp]

french glad to see your making money off us americans with our gov. :devil: :devil: :devil: :devil:

[outlaw450mxr]

did you shorten the front shocks or keep them stock length?

[thelittlefrench]

I keep them stock length-

[outlaw450mxr]

and what bend are your bars? I want new bars just dont know what bend to go with, yours look like a comfortable bend. Sorry about all the questions, hope you dont mind.

[SSJEFF]

Isn't it the rear shock that everyone is shortening?

Originally posted by outlaw450mxr
did you shorten the front shocks or keep them stock length?

[outlaw450mxr]

maybe, but if you talk to the guy at c and d racing he said that the front shocks are to long for any a arms, so if you shorten them the quad gets like 2 inches lower and more suspension travel.

[thelittlefrench]

My front and rear shocks aren't short than stock,
They are totaly stock but I'have just Unscrewed the spring preload at the maximum:) ;)

My bars is a Pro taper atv bar mid, with a Team Alba Polaris Handlebar Adapter.

http://store.albaaction.com/shop/POL-BAR-KIT.html

[agendelman]

new setup

[agendelman]

from the back

[OutlawBill]

I now have my # on

[EvilEwok]

Originally posted by pattersondp
french glad to see your making money off us americans with our gov. :devil: :devil: :devil: :devil:

..../:| you makea no sensa.

[SSJEFF]

Originally posted by EvilEwok
..../:| you makea no sensa.

I agree lol. I would think that he is helping the american economy by buying a Polaris. Anyways.........

[thelittlefrench]

I prefere buying american than japanese-
I understand that you need help with your economy:D
Don't worry, I have understand your joke!:p :)

[outlawjeff]

here is my 07 thought i would show it

[outlawjeff]

another with the way the ct looks from back

[EvilEwok]

Great outlaws btw.

[bigdad]

.

[#17TBoneRacing]

Cool picture! As I always say, if it don't fit, make it fit.

I looks a little too cold for this Florida boy though!

[Chris525]

!!!!!FOR SALE!!!!!! LIKE NEW LOW HOURS BARELY RIDDEN VERY LIGHT

[Chris525]

Just pickin, not for sale, here she is

[SSJEFF]

Originally posted by outlawjeff
here is my 07 thought i would show it
I get people asking me if you are me lol.
http://i246.photobucket.com/albums/gg101/outlawjeff/07OUTLAW525LE/22nov2007a760pix.jpg

[jdm197]

here are some updated pics.
http://i179.photobucket.com/albums/w290/jdm1974/S5000210.jpg
http://i179.photobucket.com/albums/w290/jdm1974/S5000209.jpg
http://i179.photobucket.com/albums/w290/jdm1974/S5000208.jpg
http://i179.photobucket.com/albums/w290/jdm1974/S5000207.jpg
http://i179.photobucket.com/albums/w290/jdm1974/S5000206.jpg

[sheriff525]

Here are a few from our last trip to Little Sahara with my two bros and a good friend!

[sheriff525]

One more

[sheriff525]

This one is cool!

[sheriff525]

Two of us

[sheriff525]

From behind

[67mopar]

where'd u get those eyelids, them things look sick!

[525 Outlaw Dude]

ya were did you get those Eye lids? and how did you guess do in the drags against other quad and what were they???

[sheriff525]

The funny thing is that those eye lids are just black electrical tape that i put on for about $.10. It looks cool and really hard to tell unless your up close. The best part is that you can get it anywhere. Chaulk one up for being resoursful. I am glad you like them. We raced a couple of Modded out Raptors. We got it on video too but you can't really trust the video because the raptors are going all out and my brothers are still trying to do wheelies up sand mountain while they are dragging! We got lots of cool vids and pics. I hope to put them all together and get something cool together for you all.

[400exrider_ed]

Diamondback MX

[outlaw450mxr]

Originally posted by 400exrider_ed
Diamondback MX

another 450 right near me!? haha whats done to yours? I was just at walden last saturday, you going this saturday if it doesnt rain?

[400exrider_ed]

She's actually a 525 IRS w/ Fox Podiums all around, Hipers, FMF Exhaust, Jd jetting, EHS Lid etc etc. I only work down in middletown anymore and live up north so I'll only be around for some weekday runs, and run CNYMRA weekends or some local yocal tracks, plus I cant find any good legal riding spots around m-town anymore. Its fun to get crazy looks running a IRS quad, but she runs well.

[outlaw450mxr]

o alright, looked like a 450. but i go riding almost every sunday in middletown! at tets, the cops dont care or anything, its pretty fun.

[400exrider_ed]

Originally posted by outlaw450mxr
o alright, looked like a 450. but i go riding almost every sunday in middletown! at tets, the cops dont care or anything, its pretty fun.

Rode the track near tetz for 10+ yrs until 05 it got stupid cop coverage cost me 350.00 for fines and got a trashed 450r from the impound by troop f be carefull over there.

[outlaw450mxr]

they dont care anymore unless you ride on that rode

[sheriff525]

Why did you stop for the cops?

[sheriff525]

These pics give a closer look at the eyelids

[400exrider_ed]

Originally posted by sheriff525
Why did you stop for the cops?

Cant run when your pick-ups parked there also:(

[outlaw450mxr]

did you park on the road or in the back behind the trees?

[400exrider_ed]

Originally posted by outlaw450mxr
did you park on the road or in the back behind the trees?

From 88-05 we used to drive in the long dirt lane next to the old Mexicana (now empty building) its after passing the medical buildings road and TETZ plant, when it changed hands thats when everyone got nailed. It was a one-way in and out back then we had a pit area set-up track-side where you could park, way long before all the medical buildings where built up on the newer road before the plant. I went out to look my self today that road we used is still gated off, the river trail down by the medical offices is there and that roads now paved till the end, I also saw guys on the opposite side of Goshen Turnpike riding bikes behind the cement barriers maybe thats where your riding?? I rode down the river trail on in to the original "TETZ" track we built in the 80's and its easy to see its not gettin much use and mother natures fading it away. PM me where your riding and parking, I'll be going back tomorrow to scout around, that place was the spot from 88-04 along with 5 others (one the new malls on) I rode all around m-town thats been taken away by growth and city people who move to the "country" but want it like the city, thats why I moved north.

[outlaw450mxr]

If your talking about the trail right next to the river that goes to the gas staion if you go right and other places if you go left thats the trail we ride on, and we also ride in the pit, the place with all the burms and hill climbs. If it doesnt rain this sunday ill probably go and ill take picture for you of were we park.

[Outlaw6;=-]

http://i283.photobucket.com/albums/kk318/Outlaw_6/Picture006-2.jpg

[eerhard09]

My '07 525 when it was "Dune Ready" from this past weekend at Silver Lake:

http://i3.photobucket.com/albums/y71/mre2u84/DSC00052.jpg
http://i3.photobucket.com/albums/y71/mre2u84/DSC00050.jpg

[Outlaw6;=-]

awesome looking eerhard09.. the bike looks stealth looking with the powder coating u did. I was wondering what pro taper bars u have and do u find there at a good height or a riser kit would help?

[superfly300ex]

first race on the mxr

[xtreme 250x]

I like the Race cut plastic ^^^^^^^^^^^^

[outlaw450mxr]

Originally posted by superfly300ex
first race on the mxr

why do your front shocks look like long travel? And did you do something to the back, like a different subframe. Bike looks sick though.

[nytfr8]

Hey superfly, where do you race at? That kind of of looks like Hungry Horse or Bozeman. I live in Billings, used to live in Missoula up until about 3 years ago.

[superfly300ex]

outlaw450mxr - stock shocks + extra sag spring to lower it down more. Yes different sub frame which lowers the rear a bit, moved battery to front, shaved seat.

nytfr8 - Yes that was at the Bozeman hcma race last weekend. Really impressive track this year. Im racing a few of the hcma races this season and will do spokane later in the summer.

[eerhard09]

Here are a couple pics I snapped of Jimk72's '08 525 IRS this past weekend at Silver Lake in MI....

http://i3.photobucket.com/albums/y71/mre2u84/DSC00059.jpg
http://i3.photobucket.com/albums/y71/mre2u84/IMG_0848.jpg

[sheriff525]

We haven't had any new pic's up lately

KEEP THEM COMING!

[sheriff525]

The front end looks mean.

[Evasiveone]

Some from a recent XC race.

Fighting for the corner
http://img2.putfile.com/main/6/17615235889.jpg

MX portion of the track
http://img2.putfile.com/main/6/15520145960.jpg
http://img2.putfile.com/main/6/15520150196.jpg

Finishing the open area
http://i63.photobucket.com/albums/h136/jakitymo/OCCRA%20COOPERLAND/Quad%20Q/IMG_3013.jpg

Accelerating into the trees
http://i63.photobucket.com/albums/h136/jakitymo/OCCRA%20COOPERLAND/Quad%20Q/IMG_3014.jpg

[SSJEFF]

I haven't seen you around for a while. Nice pictures.

[Outlaw6;=-]

http://i283.photobucket.com/albums/kk318/Outlaw_6/Picture006-3.jpg

[Rig]

Here's the underside...

[Rig]

My nephew and I racing up Choke at St. Anthony, both on 525's...

[montycarlo]

I had no idea there were that many outlaws runnin' around out there! Tyler329 that thing is sick! What class do you compete in at the Iowa series?

[SSJEFF]

Bad picture but...
http://i246.photobucket.com/albums/gg101/outlawjeff/07OUTLAW525LE/P1010007.jpg

[TYLER329]

Cool Triumph. I am the parts manager at Baxter Cycle which has one of the largest vintage Triumph parts inventories in the world. The owner is also a huge collector. Look it up on the web sometime and give me a call.

[SSJEFF]

Originally posted by TYLER329
Cool Triumph. I am the parts manager at Baxter Cycle which has one of the largest vintage Triumph parts inventories in the world. The owner is also a huge collector. Look it up on the web sometime and give me a call.

Thanks, not sure if a 2000 Thuderbird Sport is a vintage but I also have a 2001 Daytina 955i. It just does not match my outlaw lol. If I get a blue Outlaw I will do a picture of them.

The picture was a little fuzzy because I was waiting for my ride and got bored, pulled the two in front of the tree and the sun was right behind it and bright.

[sheriff525]

Hey ssjeff it looks like your winning if "he who dies with the most toys, wins!" I know Im not even close to a win. hahahahahha

[Beuluxe]

My Outlaw from Germany

[Beuluxe]

one more

[Chris525]

street legal ?

sweet!!!

[Beuluxe]

Yes, we can drive legal on the street

[barbakos]

Hey Beuluxe, its nice to see a German on here. Welcome! I used to live in Singen near the Bodensee.

[Beuluxe]

hi barbakos,
I live in Immenstadt, it is to in the near from the bodensee.
look at this: http://www.quad-forum.eu/portal.html
It is a Quadforum with many people from the Bodensee.
sorry, my english isn`t good.

[justin1022]

Originally posted by FReEK
Not rust BRO , Mississippi red clay/sand and thanks for your opinion

yea i figured somthing liek that i lookd at theswing arm and see nrust then looked at the rims and stuff and its all clean so i figured some type of clay or somthing.. but hey man i think it looks sick nice outlaw!!

[justin1022]

Originally posted by eerhard09
My '07 525 when it was "Dune Ready" from this past weekend at Silver Lake:

http://i3.photobucket.com/albums/y71/mre2u84/DSC00052.jpg
http://i3.photobucket.com/albums/y71/mre2u84/DSC00050.jpg

wat kind nerfs? lkooks alot like the ones on my 400ex.

[eerhard09]

Originally posted by justin1022
wat kind nerfs? lkooks alot like the ones on my 400ex.

AC Blacklines but I had them powdered, didn't buy them that way....

[Chris525]

Hey Erhard
nice pic in dirt wheels

[eerhard09]

Ha ha, thanks, I am surprised anyone even noticed! I forgot that my name on here is actually my last name, so I guess it is easy to put two and two together! Too bad the rest of the guys were not around for the pic, there were actually about 20 of us there....

[Agris]

My Outlaw

[somewon]

Here's a Pic from this weekend at Finger Lakes. My buddy had been doing this 50 ft double all day, so I figured I'd give it a shot.

[somewon]

Here's another pic of the finish line table top.

[somewon]

profile shot of the table top. Not at the most impressive point of the jump, but I guess a few people stopped what they were doing to take a look. :)

I really need to get some nerf bars, it's a little scary landing on those tiny factory pegs.

[One_Bad_400]

Originally posted by FReEK
Not rust BRO , Mississippi red clay/sand and thanks for your opinion

where is mississippi do you live?

[One_Bad_400]

i have a HUGE sweet spot for IRS Outlaw's.. i wish i could own one. it would have to be an 08, the 09's are FUGGLY.. my girl friend totaled her KFX so one day hopefully we'll get here a IRS outlaw so i can ride it.

but some good lookin bikes ya'll got..

[sheriff525]

http://www.predatorowners.com/index.cfm?action=thread&catid=131&topid=572&thrid=42970&posthist=-48&page=4

Check these pics. Just finished!

[montycarlo]

My 08 450MXR

Flexx bars // Custom made +1 anti-vibe stem // Precision stabilizer
Hipers & Razr2/Irazr // Shocks revalved & resprung for XC
HMF/Gallagher racing front hubs & fender braces (fronrt & rear)
HMF slip-on // PRM bumper // REM Performance heel guards

http://i8.photobucket.com/albums/a45/Montycarlo/P9301690.jpg
http://i8.photobucket.com/albums/a45/Montycarlo/P9301691.jpg
http://i8.photobucket.com/albums/a45/Montycarlo/P9301692.jpg

[babence1227]

MY Bike

[525Outlaw#55]

A little late but figured I'd show some older pics of mine from day one to the latest I have, don't have any of the latest updates yet.....


<a href="http://s52.photobucket.com/albums/g22/PitBull660Man/?action=view&current=Outlaw5.jpg" target="_blank"><img src="http://i52.photobucket.com/albums/g22/PitBull660Man/Outlaw5.jpg" border="0" alt="Photobucket"></a>

<a href="http://s52.photobucket.com/albums/g22/PitBull660Man/?action=view&current=Outlaw4.jpg" target="_blank"><img src="http://i52.photobucket.com/albums/g22/PitBull660Man/Outlaw4.jpg" border="0" alt="Photobucket"></a>

<a href="http://s52.photobucket.com/albums/g22/PitBull660Man/?action=view&current=Outlaw.jpg" target="_blank"><img src="http://i52.photobucket.com/albums/g22/PitBull660Man/Outlaw.jpg" border="0" alt="Photobucket"></a>

<a href="http://s52.photobucket.com/albums/g22/PitBull660Man/?action=view&current=Outlaw10.jpg" target="_blank"><img src="http://i52.photobucket.com/albums/g22/PitBull660Man/Outlaw10.jpg" border="0" alt="Photobucket"></a>

<a href="http://s52.photobucket.com/albums/g22/PitBull660Man/?action=view&current=Outlaw9.jpg" target="_blank"><img src="http://i52.photobucket.com/albums/g22/PitBull660Man/Outlaw9.jpg" border="0" alt="Photobucket"></a>

<a href="http://s52.photobucket.com/albums/g22/PitBull660Man/?action=view&current=Outlaw11.jpg" target="_blank"><img src="http://i52.photobucket.com/albums/g22/PitBull660Man/Outlaw11.jpg" border="0" alt="Photobucket"></a>

<a href="http://s52.photobucket.com/albums/g22/PitBull660Man/?action=view&current=Outlaw12.jpg" target="_blank"><img src="http://i52.photobucket.com/albums/g22/PitBull660Man/Outlaw12.jpg" border="0" alt="Photobucket"></a>

<a href="http://s52.photobucket.com/albums/g22/PitBull660Man/?action=view&current=l_0ae798f1a4ea4250b5744c7017e86743.jpg" target="_blank"><img src="http://i52.photobucket.com/albums/g22/PitBull660Man/l_0ae798f1a4ea4250b5744c7017e86743.jpg" border="0" alt="Photobucket"></a>

<a href="http://s52.photobucket.com/albums/g22/PitBull660Man/?action=view&current=MVC-008F.jpg" target="_blank"><img src="http://i52.photobucket.com/albums/g22/PitBull660Man/MVC-008F.jpg" border="0" alt="Photobucket"></a>

<a href="http://s52.photobucket.com/albums/g22/PitBull660Man/?action=view&current=MVC-014F.jpg" target="_blank"><img src="http://i52.photobucket.com/albums/g22/PitBull660Man/MVC-014F.jpg" border="0" alt="Photobucket"></a>

[sheriff525]

The new badge

[sheriff525]

2

[sheriff525]

3