Blindkaeta
05-23-2007, 04:29 PM
06 TRX 450r
walsh: a-arms, tie rods, swingarm and link, gussett kit, stem, pivot bolt, and bar clamp
Fox evol fronts, podium rear
Fasstt Bars
DG national bumper
Percision Stabalizer
lone star axle, carrier, and anti-fade
07 white plastic and 06 red plastic
Douglas 4-1 rolled lip fronts rear douglas beadlocks
quadtech black plastic hood and hump seat
K&N filter kit
Rossier Short pipe
AC propegs
Ims heel gaurds
ASV levers
CRF 40mm FCR carb with hot start
Powermadd Guards
Tusk Gas cap
Engine: Full ATP National Engine
14.1 JE ATP piston
Crank (aftermarket crank and rod)
Head (port and polish with chamber work)
Valve Job (titanium +1 exhaust and springs)
Tranny (Cut and new gears)
powdercoat frame, sub frame and battery box
This Quad maybe has 2hrs on it since total rebuild. Rebuild including every bearing in the engine and the frame, I also changed the frame and subframe to white and the powder coat is clear coated to keep scratches from showing up. The plastics are OEM 07 white.
Everything in the engine is brand new including the clutches, tranny, crank, cam, valves and piston.
The only thing that I didn't get redone is the powder on the a-arms… 18000.00 invested sacarfice for 10,000.00 obo
This Quad is set up for MX 180-200 rider If you have any questions Please call me 321-388-3309
walsh: a-arms, tie rods, swingarm and link, gussett kit, stem, pivot bolt, and bar clamp
Fox evol fronts, podium rear
Fasstt Bars
DG national bumper
Percision Stabalizer
lone star axle, carrier, and anti-fade
07 white plastic and 06 red plastic
Douglas 4-1 rolled lip fronts rear douglas beadlocks
quadtech black plastic hood and hump seat
K&N filter kit
Rossier Short pipe
AC propegs
Ims heel gaurds
ASV levers
CRF 40mm FCR carb with hot start
Powermadd Guards
Tusk Gas cap
Engine: Full ATP National Engine
14.1 JE ATP piston
Crank (aftermarket crank and rod)
Head (port and polish with chamber work)
Valve Job (titanium +1 exhaust and springs)
Tranny (Cut and new gears)
powdercoat frame, sub frame and battery box
This Quad maybe has 2hrs on it since total rebuild. Rebuild including every bearing in the engine and the frame, I also changed the frame and subframe to white and the powder coat is clear coated to keep scratches from showing up. The plastics are OEM 07 white.
Everything in the engine is brand new including the clutches, tranny, crank, cam, valves and piston.
The only thing that I didn't get redone is the powder on the a-arms… 18000.00 invested sacarfice for 10,000.00 obo
This Quad is set up for MX 180-200 rider If you have any questions Please call me 321-388-3309