PDA

View Full Version : hot start removale


sc400ex_rider
05-21-2007, 11:44 AM
what do i do? put a bolt in the hole? do i want the passages open or closed off? thx
pro-rider46
05-21-2007, 06:33 PM
try sticking in a plug just for a try, and if that doesnt work pull it out and try it

why do you want to get rid of it anyways?
the 97
05-21-2007, 08:33 PM
why would you take the hot start off??????????
sc400ex_rider
05-22-2007, 05:06 AM
im putting the carb on my 400 ex. i believe its an air bleed so i would block off the ports?
speedfreaksguy
05-22-2007, 08:02 AM
You need to leave the plunger in there. Just remove the cable and screw the plunger, spring and cap back on.
GPracer2500
05-22-2007, 08:33 AM
Originally posted by speedfreaksguy
You need to leave the plunger in there. Just remove the cable and screw the plunger, spring and cap back on.

Sure? I think most guys just plug the hole with a rubber plug, silicone, or something like that.
05-22-2007, 12:41 PM
Originally posted by speedfreaksguy
You need to leave the plunger in there. Just remove the cable and screw the plunger, spring and cap back on.

That's how I would do it.