450R Hill Bike

[R3Concepts]

Im selling my stockbore Hill bike to look at other possibilities. Its an 04. Fastest Stock bore 450 in AZ.

Chassis-
OEM chassis, stripped, tabs cut, middle plate cut out between lower arms, welded on foot pegs, lower mounts removed
¾ .058 wall chromoly subframe
Racers Edge AZ lower arms, stock uppers
Racers Edge AZ +6 swingarm
Racers Edge AZ .058 wall stem/drag bars
Shaws all around
Machined down stock spindles, no brake mounts
Aluminum tie rods
RIS 10x2 spindle mounts with 18” smooth buffs
21x12x8 6 paddle Haulers on 8x7 Direct Drive Super Drag cut wheels
JJ and A play axle, with Banshee sprocket hub, but the rest is Honda
Galfer Wave rotor
DFR block off
TM slider
Rear brake setup on handle bars
Tusk gas cap
ASV clutch lever
Maier plastic
Laker Custom vented hood
New OEM radiator

Racers Edge AZ Motor-
Stock bore, and stroke
CP piston
Web Cam
Ferrea Ti valves
PSI springs
CRF rocker arm
DASA intake
DASA pipe
Dyna ignition
Crank Works crank, have over 800 in crank.
Hot Rod
28mm Busa buckets with tower
45 Packard Lectron
Moose throttle and cable (black)

Im sure theres more Im missing. Makes 62/40 on C12 race gas. Weighs 245 pounds with more weight that can come off. Gearing is currently 13/42 but have many sprockets and extras. Does 57/58 on Olds with jockey. Will sell out right for 9k or may consider the following trade options. Located in Tucson, AZ

Trades:
Stock 04-05 and 4k cash
Trade for MX Honda and 2k cash.
May sell as a roller and cash?