PDA

View Full Version : 34mm carb on a bone stock blaster



Mike-Blaster
05-10-2007, 08:08 PM
a 34 mm carb fit on a 200 blaster bone stock without porting or pipe?
im living in quebec canada and here pipe are banned for the federate trail and cops give a ticket ton rider with a pipe on her quads
sorry for my bad english guy

honda450rider33
05-14-2007, 01:45 PM
i would go with a 28-32mm i think 34 on a stock motor is to big just my 2 cents

blasterfreak99
05-14-2007, 02:08 PM
Originally posted by honda450rider33
i would go with a 28-32mm i think 34 on a stock motor is to big just my 2 cents

yea a lot of guys run the 30mm oko keihin carb

honda450rider33
05-14-2007, 04:09 PM
i think 30 would be good, if you do porting or a bigbore you could run a 34mm

Xater
05-14-2007, 05:06 PM
it will work if you have the right jetting. i dont see why you wouldn't be able to put on a pipe, fmf makes good quiet silencers

honda450rider33
05-15-2007, 02:32 PM
you can do what you want but i would not reccommend a 34 i think with a stock motor it will be too much why cant you have an after market exaust?