PDA

View Full Version : kfx 450 long travel a-arms



trompen542
05-09-2007, 05:53 PM
I just saw a set of koq long travel a-arms for the kfx that are going on pro am rider Chad Reeds quad for this week end at the Taylorsville wpsa. they are +2 +1 and have 12 inches of travel. These are sweet, and from what I understand, they will be on the market by monday.

pudamac12
05-09-2007, 06:05 PM
I have had my set of SMC fabrication arms for three weeks already. $575 for long travel

KB Motorsports
05-20-2007, 08:35 AM
If your still interested in a set of LT let me know.. Most of the time I can knock off a percentage in give free shipping.

Take care

spanky101
05-20-2007, 09:44 AM
Ken, who out of your companies that u sell products have kfx lt arms? Thanks

KB Motorsports
05-24-2007, 10:15 AM
Spanky101.. Sorry for the delay response at the time SMC fabrication. I have to call around to see about the other companies.

spanky101
05-24-2007, 08:07 PM
Thanks kenneth. Do you mind makin a call to nmotion and seeing how long for their pipe too? Thanks

pudamac12
05-24-2007, 08:17 PM
hey spanky have you considered the dasa? I just got one and it is freaking awesome

KB Motorsports
05-25-2007, 11:55 AM
The Nmotion exhaust will should be done in a couple weeks. However, Kevin@nmotion wont be back in till Tuesday of next week.

spanky101
05-25-2007, 08:29 PM
Ive for sure looked into the dasa and if the price is more on the nmotion i will proboly end up with the dasa. I am just stuck between the longer 99db can or the classic 101db pipe

TBD
06-07-2007, 11:00 AM
Originally posted by pudamac12
I have had my set of SMC fabrication arms for three weeks already. $575 for long travel

Where are all these companies getting there ball joints or are they just using pins with hiems? The ball joint is a totally different taper then any other so none that are available now will work.

KB Motorsports
06-07-2007, 11:03 AM
TBD i'm 97 percent sure its a ball joint..

T@AFP
06-07-2007, 11:18 AM
We are finalizing our testing for the MGC LT MX this weekend. Then we will go into production week of 6/11/07. Should starting shipping week of 6/18/07.
MGC XC standard and MGC XC long travel shortely after that.

TBD- We are using ball joints. NO HEIMS!


www.atvfourplay.com

TBD
06-07-2007, 11:34 AM
So you guys are going to sell arms with ball joints that do not have the correct taper for the spindles? Kind of like all those manufactures that sold the LTZ arms with Yamaha ball joint tapers (that were not correct either). I'm not trying to base on you guys but I wiould really like to know where you got the correct ball joints.

Since everyonelse is stating this my arms are also done and in production, minus ball joints because the correct ones are bieng made at this time.

T@AFP
06-07-2007, 02:44 PM
Originally posted by TBD
So you guys are going to sell arms with ball joints that do not have the correct taper for the spindles? Kind of like all those manufactures that sold the LTZ arms with Yamaha ball joint tapers (that were not correct either). I'm not trying to base on you guys but I wiould really like to know where you got the correct ball joints.

Since everyonelse is stating this my arms are also done and in production, minus ball joints because the correct ones are bieng made at this time.

Where did I say I was going to sell arms that will have the wrong taper?

We have ball joints for the KFX450R that fit the taper of the spindles.

TBD
06-07-2007, 05:19 PM
Sorry Tom i did not realize you had the correct Ball Joints made. Can i purchase a set of 4 ball joints for the KFX450 from you?

T@AFP
06-08-2007, 05:30 AM
apology accepted.

I only have a few dozen here that I need for orders. I wanted to make sure the tapers/dimensions were correct before ordering the normal pile of them. So I do not have a surplus available.


I have more ordered. If you still need them when they come in I will sell them to you. You know the "game"......not sure when they'll be here either.

www.atvfourplay.com