PDA

View Full Version : 125 throttle return spring



Louie
05-08-2007, 05:08 PM
Has anyone softened up the throttle return spring and if so what did you do? It seems the spring is a little to hard for my son so i need to lighten it up a little. Thanks !!

RTJ
05-08-2007, 10:01 PM
A LITTLE TIP I'VE PICKED UP. TURN THE THROTTLE ASSEMBLY FORWARD OR CLOCKWISE. IT EISIER TO PUSH DOWN THAN FORWARD OR EVEN UP. JUST MY 2 CENTS

WMW-F4R
05-09-2007, 12:36 AM
We cut 21/2 coils off the return spring and bend it flat again...also remove the return spring from the throttle assy. and finally a thin coat of white grease on throttle arm and lube cable.
Turning the throttle up helps also...we use easy pull throttles if thats not soft enough.

Louie
05-26-2007, 08:34 AM
are there two return springs? The only one i seen was in the throttle assembly.