PDA

View Full Version : Outlaw 90



pbr524
05-08-2007, 04:24 AM
Anyone know were to get aftermarket parts for the new outlaw90 and if there is anything out for them yet? Nerfs,Pipe and BumperAnd can you hook a prodesign killk directly up to the stock tether?

Thanks Mike

250rbadboy
05-22-2007, 06:40 PM
is it 2 or 4 stroke? if its the 2 then any thing for the predator 90 whould work.i whould think.

Choppers
06-07-2007, 07:13 PM
it's a 4 stroke.

Jarhead
06-08-2007, 12:49 PM
Hetricks has some items that they are starting to produce.

BradLoomis
06-08-2007, 02:46 PM
All the stuff that I know of is coming out of Rath Racing.

Contact Us
Rath Racing Incorporated
20784 Highway 15 North
Hutchinson, MN 55350

Phone: 320.234.7223
Fax: 320.234.7233
E-Mail: orders@rathstore.com

schortzracing
01-21-2008, 10:24 PM
YOU CAN ALSO CONTACT YOUR DEALER, THEY SHOULD BE ABLE TO ORDER ALL THE PARTS THAT COME ON THE OUTLAW 90 LTD NERFS, SHOCKS, TIRES ECT.

jetta75
01-23-2008, 09:32 AM
The stock tether isn't great and not easy to use so I hooked up a pro armor. Had to hook it up to the coil and ground. The stock wires would not kill it.

jjd223
01-25-2008, 02:19 PM
The action on the stock polaris outlaw tether is not the same as the aftermarket tethers. The Outlaw stock has a normally open switch, it is closed with the tether on, and the circuit opens when the tether is pulled. This interrupts the start safety circuit and does not ground the coil. the Most other tethers are normally closed switches and they are open with the tether on and the circuit closes when the tether is pulled and grounds the coil.

tireman43
01-25-2008, 03:20 PM
You can buy an aftermarket tether both ways. You can also wire the aftermarket tether direct to the coil and ground.