PDA

View Full Version : blater



LRD450R
05-06-2007, 09:40 AM
about how fast well a blaster go and does it have alot of tork

honda450rider33
05-06-2007, 07:01 PM
a blaster will roughly do 50-53 mph they do have torque not 450 torque but they do pull harder than a 250ex or a z250

85and93
05-06-2007, 07:28 PM
well i think mine goes about 60

honda450rider33
05-07-2007, 02:26 PM
Originally posted by 85and93
well i think mine goes about 60

is it stock gears

85and93
05-07-2007, 03:03 PM
all i have is a 34mm carb and a pipe

honda450rider33
05-07-2007, 03:32 PM
does it have stock sprockets

honda450rider33
05-07-2007, 03:34 PM
Originally posted by honda450rider33
is it stock gears

how is that 34 mm on a stock moter does it work good or is it to much i am looking into buying a carb for my blaster but i thought a 34mm would be too much i was looking for a 28 or something like that

85and93
05-07-2007, 03:37 PM
well i dont really know much about motors bcuz my dad does everything. but i usually see people with 34mm and some people have around 40mm.

#22blaster240
05-07-2007, 04:02 PM
I RUN A 38mm CARBWITH THE CT MOTOR THOUGH.

honda450rider33
05-07-2007, 06:04 PM
i have a full fmf pipe, reed spacer, k&n filter, no lid, oil injection block off and i was looking into a 28mm i looked at the 34mm but i thought it would be to much for a stock motor i dont know what i am going to do

pbblaster2
05-07-2007, 08:02 PM
we were looking at a 28mm carb off of a 85 dirt bike i think 28-32 is good for a stock motor as long as you have a pipe and reed vavles to let it breath =)

honda450rider33
05-08-2007, 03:50 PM
Originally posted by pbblaster2
we were looking at a 28mm carb off of a 85 dirt bike i think 28-32 is good for a stock motor as long as you have a pipe and reed vavles to let it breath =)

what do you think of a 34 mm would it be ok for stock so then if i wanted to do motor work i would already have the carb