Were up and ready to GO with a new look

[QuadJunkies]

We Finally grew a set and decided to cut the fenders ..:D :blah: lol
I took a little more off than I wanted due to an "oops" :( but it all worked out ,justa little shorter of an edging that I was aiming for .

Thanks for the pics Raidernut ,its was of great help!


http://www.pbase.com/quadjunkies/image/78275671.jpg
http://www.pbase.com/quadjunkies/image/78275673.jpg
http://www.pbase.com/quadjunkies/image/78275674.jpg
http://www.pbase.com/quadjunkies/image/78275678.jpg

[QuadJunkies]

couple more
http://upload.pbase.com/image/78277506/original.jpg
http://www.pbase.com/quadjunkies/image/78277507.jpg

[rhinorick]

sure looks nice. how doese he like it. has he road the blaster/80

[QuadJunkies]

Originally posted by rhinorick
sure looks nice. how doese he like it. has he road the blaster/80
He likes it alot.he REALLY likes the rear !
Hes used to a cut front fender so I think he will like racing with it .

The front fenders done serve much purpose for mud anyhow. lol

He has not rode the Hybrid, nor will he until its HIS.
If he wrecks Kelseys quad , I dont want to be ANYHWERE near when she got ahold of her Brother:eek2: :p

[3-D Racing Dad]

I dont think you cut to much off, that little mini looks great...

[ecmini1]

Now thats what a mini should look like. Great job! Your son will be proud to show that off.

[QuadJunkies]

Thanks :)
His Bday party is today and we got him some Rockstar sitckers to add as well.
The only problem is now theres less places to put stickers. LOL :p
When my Husbnad has some free time to PC his own nerfs, were probaby going to re-do Brandons heel guards as the PC for some reason didnt turn out and is not holding well.

[king219]

THAT MINI LOOKS GREAT

[TWISTED DINLI]

thats awesome lookin:eek2: very nice job.

[papasmurf]

Awesome quad!!! The cut fenders really make it look like a screamer.

Is the left hand hydraulic brake lever standard on that quad?

[QuadJunkies]

Originally posted by papasmurf
Awesome quad!!! The cut fenders really make it look like a screamer.

Is the left hand hydraulic brake lever standard on that quad?
Yes it is .:)

[oldyeller]

Originally posted by QuadJunkies
Thanks :)
When my Husbnad has some free time to PC his own nerfs, were probaby going to re-do Brandons heel guards as the PC for some reason didnt turn out and is not holding well.

I have to get/fabricate some heel guards for the nerfs on our Viper so I was checking out your pics pretty closely..I'm not sure what you mean when you say "PC"?..I was going to make something very similar to what you are running..Are you having a problem with that design?

[QuadJunkies]

Powdercoating. ;)
It didnt hold well on his for some reason,they even had a dif. texture than what was on my Daughters.ALOT more course,hers was really smooth and will wash up nicely.

No problems what so ever(knock on wood!:p )

We liked them enough that we custom fit them also on my Daughters Hybrid :)

We had rivets we had to close up with welds on my Daughters cause they wouldnt hold. But all is good now.

[drr5]

great looking bike the fenders are cool may have to get out the cutters tonight. great job on the bike.:D

[QuadJunkies]

Originally posted by drr5
great looking bike the fenders are cool may have to get out the cutters tonight. great job on the bike.:D
Thanks:)
post a few pics if you decide to cut them! :)

[drr5]

will do :D

[kenjolly]

What did you use to cut the finders.

it looks cool

[drr5]

i use a small air saw, layout the cut lines with a piece of masking tape find points to measure from cut along the line, take the edge of a razor blade and lightly scrape the edge, ten if you want take a small propane torch and heat the edge it will soften up the edge and look near factory, or ken give me a call and ill do them for you.:)

[QuadJunkies]

We heated up ours with a small propane torch also and cleaned the edges up with a file and razor as well.

We always have used a dremel,but personally they dont work as that well,thats all I had in the garage at the time but the torch does make a nice smooth edge when your done .:)

drr5,did ya git'er done?!!:blah:

[riding4fun]

I'm so glad you all are around. If you weren't I probably would have never done something like this. Here's my two

http://i6.photobucket.com/albums/y237/sdflenner/IMG_3447.jpg
Cassidy's

http://i6.photobucket.com/albums/y237/sdflenner/IMG_3446.jpg
Zachary's

[hotquads1]

they all look great ! such a small change can set you apart from the others , its great to be a do it yourselfer, aint it !
marc

[riding4fun]

Marc,

Yes it is. It's nice to save as much money as possible.

Darrell

[QuadJunkies]

Looks good!!