Wiring a ER to start in gear?

[yfzmx10]

Does anyone know how to wire a TRX450ER to start while it is in gear? I had a problem stalling the bike and I always had to go to neutral to fire it up. I need to fix this asap.

[taino_racing]

i took the two wires at the clutch and spliced them together!i warn u, be careful as i have had people hit the start button and it took off!could be very dangerous!



(2) 06 250ex
06 400ex
07 trx450er white

[yfzmx10]

Originally posted by taino_racing
i took the two wires at the clutch and spliced them together!i warn u, be careful as i have had people hit the start button and it took off!could be very dangerous!

haha ok thanks for the help. I always grab the cluth before I start the bike though.

[WheelieMan4]

Yea..thats what I did on my 400ex and my buddy did that on his 450er

[GIXXER1KR]

I left it so it has to be in neutral.Theres enough problems with the starter already!!!

[trick250r]

what are you guys talking about... my ER has started in gear since i picked it up from the dealer brand new.

[TRX450RACER174]

the splicing of wires has to do with removing the stock clutch perch with the neutral switch attached and replacing it with a asv lever or a ez pull lever w/no clutch switch.

[manassashonda]

U guys are dumb all the ERs start in gear. just dont push the throttle while starting.

[miami305]

yea my 450er starts in gear since the day i got it wat are u guys talking about?

[TRX450RACER174]

If you guys would read into the thread what we are talking about is when you remove your stock clutch lever you lose the clutch saftey switch, if you leave the wires disconnected the bike will only start in neutral even if the clutch is pulled in, so when you connect the wires together the bike now thinks that the clutch is pulled in all the time if the clutch is engaged or disengaged.

[taino_racing]

well said!