**MX quad wanted**

[KEVIN300A]

Looking for MX quad near NY willing to travel a little bit Looking for something under $4000, cash in hand let me know what you have!!

i have this full long travel mx ready z440...tons of parts....i need a little more than $4000 though...i'm in harrisburg,pa 17111...

[Bubba ryan 17]

i have a national race ready 300ex best of everything sparks did the motor im willing to take 4,000 for it it will come with flat track and motocross set ups

[KEVIN300A]

Dlerch nice quad can't go that high though,Bubba not interested in a 300ex thanks for looking tho.

[Gumby]

440ex

Stock frame reinforced and powdercoated gloss black. Subframe tabs cut off and ground smooth. No cracks/bends. Integrated dual footpegs.

Motor. FRESH. Just rebuilt in January '07. All motor work done by Mike's Cycle Shop (The oldest Honda Dealer in the state of Wisconsin, VERY reliable). One race on the motor. Complete tear down. New Rod (Hot Rodz), Crank Bearings, Seals. All gears, shift forks, drum, etc were spotless. New clutch plates and springs also put in. Cylinder has an IMS 440 sleeve and a 11:1 Wiseco Piston. Runs on high octane pump gas (92-93). Webcam aggressive grind is 3 years old but in good shape. New cam bearings, valve springs. Head is off of a 2001 and is mildly ported.

The rest front to back:

- Complete Fullbore Plastic (New in January '07)
- Janssen Motorsports Custom Graphics w/ White Bros Seat Cover
- AC bumper
- Elka Triple Rate SSD Frt. Shocks with Extended hoses
-- Fresh in February '07 valved for 180 lbs MX
- Streamline ext. brake lines
- All new pads (January '07)
- LoneStar +2 Anti-Vibe Steering Stem
- Wave Frt. Rotors
- Janssen Motorsports Rev Box
- Rebuilt Calipers (January '07)
- Janssen Motorsports Outlaw Std. Travel +2 A-arms.
- New Kenda Klaw Frt. Tires on ITP Baja wheels.
- Denton Steering Stabilizer
- Full system Curtis Sparks Exhaust
- Custom Polished Air Shrouds
- FCR 39mm Carb with Janssen Motorsports Needle
- Graydon Proline Nerfs
- Magura hydraulic clutch w/ braided stainless line
- Tag T-2 Fat bars
- Powermadd Hand Guards
- Se7en Racing Anodized Red throttle cover.
- New Starter (January '07)
- UMI Alum. Airbox.
- 2 K&N Filters
- New Battery (January '07)
- Stock rear shock rebuilt with Elka Dual Rate Springs and internals. 180 lbs MX (March '06)
- Janssen Motorsports Outlaw I Swingarm +1 1/4" with Std Linkage
- LoneStar Tapered Row Bearing Carrier.
- TM Designworks ChainGuide
- Lone Star +4 Axle
- Braking Rear Rotor
- New Kenda Klaw rears on ITP Baja Wheels.

-Flaws-

- Steering Stabilizer slight leak but still very effective. Would replace at the end of this season.
- Magura Hydraulic Clutch needs to be bled for added pressure
- Steering Stem bearing is squeeking. May need replacement at the end of this year.
- Crankcase drain sleeve hairline cracked. Was professional welded and coated. Does not leak. Not an issue, but wanted you to be aware of everything.


Included but not installed.

- DG Swingarm Skid Plate
- DG Chassis Skid Plate

This thing won me many championships. I am selling because I am moving up a class and need a 450r.

I was asking $4000 obo. I am going to put this up as it's own separate post soon but I am working out of town so I can't get any pictures. If you would like pics, I can send them when I get home.

[KEVIN300A]

Quad sounds nice but, Wisconsin is pretty far away and shipping is expensive, send me pics when you get home!! thanks

[charles ford]

just thought I'd let you know what I have. it's on e-bay right now and is for sale or trade for a 4x4 atv, jet ski, boat, car,??? It's a 01 honda 400ex with title it has a NX 650 motor in it. it's the same as the XR650L motor. looks like a stock 400ex. let me know if you want to know more about it. charliekat@oh.rr.com
Chas

[Gumby]

I would be willing to drive for the right price. I have friends out that way. I will send pics this weekend if all goes right.

[KEVIN300A]

K Gumby let me know!!

[Gumby]

Here are some not so good shots that I have saved on my laptop. i'll send more later.


http://a466.ac-images.myspacecdn.com/01160/56/44/1160444465_l.jpg

http://a615.ac-images.myspacecdn.com/01160/41/65/1160445614_l.jpg

These images were taken last fall. The headlights are not on it, but will be included if you'd like. Also, there are brand new Kenda Klaws all the way around now. Thanks.[

[billyboy]

I have a 1986 330R long travel for sale. Very nice quad. We could talk price.