Rear Caliper/Ball Joints/Tie Rod Ends/Bar Clamp

[ctheojr450]

Looking for some used 400ex parts.

1. Rear Caliper

2. Ball Joints/Tie Rod Ends/A Arm Pivot Bearings OR front A arm setup

3. Oversized Bar Clamps with/without Oversized Bars

4. Front Bumper

I prefer to use paypal.

[ctheojr450]

I need a rear caliper ASAP and there isnt much on eBay right now.

[ctheojr450]

My rear caliper cracked in half. How? I dont know. Bump...Someone has to have one lying around!

[ctheojr450]

bump

[Chino886]

Let me go diggin in my box of 400EX parts.

I know I have the rear master cylinder but may or may not have the caliper.

I know I have a set of pro taper fat bars, possibly tie rod ends, and possibly stock bushings.

[ctheojr450]

Originally posted by Chino886
Let me go diggin in my box of 400EX parts.

I know I have the rear master cylinder but may or may not have the caliper.

I know I have a set of pro taper fat bars, possibly tie rod ends, and possibly stock bushings.

Chino, definatly interested in the bars, tierod ends and bushings...By any cahnce What bend and color are the tapers?

[Chino886]

Hey,

The bars are Pro Taper, just the plain jane aluminum standard color. They are a mid bend bar.

I found the bushings last night, but dumb me forgot to label the baggie, I can't remember if those are my EX bushing or my R bushings. They might be the same so let me find out.

Let me check the tie rod ends over good before I sell them. I don't want to sell you junk.

Chino

[ctheojr450]

bump

[Chino886]

Heres a pic of the bars

[395Rider]

Check out this link of the parts I have on Ebay

http://motors.search.ebay.com/_W0QQsassZadam86hondatrx250r

[YTZ250#1]

I have a set of tie rods I can sell. both rods ,inners,& outers. $30 shipped.