Frame tweaked?

[Old Head]

Theres a difference in the spacing from the a-arm to the shock spring. The one thats closer is the tire that leans in on top / l< like this. Really messing with me for setting my toe.

http://i146.photobucket.com/albums/r276/oldhead400ex/tweak002.jpg

http://i146.photobucket.com/albums/r276/oldhead400ex/tweak001.jpg

[Barrymaxx]

Could be a variety of things. Bent spindle, bad arm bushings, tweaked a-arm, or possible a frame.

The shock could also be bent a little.

[Old Head]

I tagged a tree awhile back with the side thats closer, but it was like less than 5mph. Guess it was enough to throw things off.

[Sparky_20]

show us some pictures of the entire a arm its self. Did you happen to bend a rim at the same time?

[Old Head]

I've looked at this a hundred times and can't see anything bent. i've even compared it to my sons quad with measurements and can't find anything different.:(

[mic 902]

Take the shocks out and swap them around. If the small gap swaps sides then it is your shock, if not it could be heaps of other things, you could always get in contact with someone who has a frame 'jig' and take it to the to measure it up.