Oil over flowing when remove dipstick

[DOHC]

Hey how come when i remove my dipstick the oil overflows out. No its not because i put to much in either. Im thinking the rings are gone causing blow back but i just want ur imput.

[400eXr1d3rZ]

How much oil do you put in it? Because it might be possible that you're actually putting too much without realizing it.

[DOHC]

I put 1 and alittle more than 1/4 bottles in

[blasterandy]

Thats pretty good. (ur talking quarts not gallons rite) Considering You emptied it before you put more in it does sound something like blown rings. Do you have a bore kit in it.

Also check the air box is there any in there. It could be presurizing the oil system and making it back up.

[DOHC]

for some reason its not doing it anymore, thanks anyways

[NeedsaYfz]

Same thing happened to me last month. If it happens again change the oil filter.

[04exking]

Originally posted by DOHC
I put 1 and alittle more than 1/4 bottles in

I put a little more than 2 quarts in and it is still below the full line on the dipstick. I've ran it like this since I bought it and it always takes two and a little more quarts.

[400exrider707]

An oil change with filter should run you 1.95qts. I alwasy just put 2 quarts in. Usually you have to put in 1 and then half to 3/4 of the second, then start it up and let it cycle through a little, then put the rest of the second quart in.