IMS Heel Gaurds on AC nerfs

[Knarf0486]

Im looking to possibly try and put some IMS Heel gaurds on my 06 but they are supposed to be used with the IMS Footpegs. I have a set of AC Nerfs with the replaceable footpegs and was wondering if any of you guys modded the heel gaurds to make them work?

I'm sure you can make it work.

[TRX450RACER174]

I just picked up a set from ims and installed them on my blingstar dc racer nerfs with only minor mods, can post pics later when i get off of work.

[Knarf0486]

Nice, lets see the pics.

[TRX450RACER174]

Alright here is the pics, basically as you can see in the first pic i had to drill a couple of holes in the peg and attach the guard to the back of the peg. The 2nd pic show the bracket i made from 1/4
flat aluminum to compensate for the lowered pegs,i am 6'2 so the feel good lowered the a 1 and 1/2in. The third and fourth pics are the final product about an hours work total.

pic1
http://www.hotboat.com/image_center/data/500/TRX450ER_003_00.jpg

pic2
http://www.hotboat.com/image_center/data/500/TRX450ER_004_00.jpg

pic3
http://www.hotboat.com/image_center/data/500/TRX450ER_005_00.jpg

pic4
http://www.hotboat.com/image_center/data/500/TRX450ER_009_00.jpg

the other side is almost the same except for the longer bracket, about an hours work total. It's not impossible just by them and do a little fab Good luck!

[Knarf0486]

Sweet thanks for the pics man, Bike looks sickkkk