07 TRX250EX New Handlebar

[tedwilley]

I recently bent my handlebar doing an unintended somersault (me and the quad). Any advice on replacement handlebar brands? The Handa OEM is around $50. I don't want to spend $200+, but am open to a quality relacement that is reasonable.
Thanks!

[m.h.s.c.#527]

flt aero flex cr double high if ur tall at all

[tedwilley]

Thanks, m.h.s.c.#527
Will I have to extand any of my cables> WHat about the choke control. I have noticed no braket for this on the aftermarket models. Although I haven't actually need it yet this year.

[tedwilley]

BTW, to all of you who do not feel the need for chest protects or the like, I dislocated my collarbone cracked two ribs, and tore some muscles in my lower back during my recent accident. And, I was traveling about 2-3 MPH when I somersualted over the handlebar. I attempted to roll clear to my left, unfortunately, my quad rolled over me as I came to a sitting position.
I am convinced that a chest protector or air suit would have prevented my collarbone and rib injuries. I was trying to save money by waiting to buy one. Needless to say the loss of work, medical bills and outright pain were not worth the impled savings. I was smart enough to have a helmet and gloves thankfully!

[BlasterEaten250]

Sorry about your crash, I always wear my chest protector too ever since my dad cracked his sternum, a few ribs, and punctured a lung.

Pro Taper is a good bar and looks cool, I believe the SE bars are around $70. There is also renthal, which is $60?(could be wrong) I believe. If you want to go the cheaper route Fly makes cheapy bars for about $30.

[bash3r]

I'm looking for new bars too, here's a good link for specifics on bar bends per manufacture.

Let me know what you decided on. I'm a taller rider, 6'0" and need to find a good bend for me..

http://www.rockymountainatv.com/handlebarinfo.do;jsessionid=CC9C2D78D8179CAE2AFD46 809D574F87.webrmatv2

[hillclimbingrec]

I have some stock blaster handle bars with a cross bar... they are not bent. i think they are the same height as the stock honda, but a little wider.

Let me know

[tedwilley]

bash3r
I got Pro Tape SE ATV high bend. I haven't installed yet.
I was able to bend the stocks habdlebars with a cheater pipe over the grip, enough to hold off putting the new bars on. I need to plen out what to do with the ignition switch and lights, first,;)

[bash3r]

i ditched the stock light for sure. I'm putting the ignition switch probably on the left plastic side, and the neutral/reverse lights on the right side OR if they will fit I think it'd be cool to have the neutral/reverse lights on the gas cap plastic cover. what have other done? got pics?

[tedwilley]

Not sure what you mean by gas cap, but electricity (even low volatge)and gasoline don't sound good!

[Xylene]

ProTaper SE Raptor bend, the plastic peice with the key and lights fit under it.. tightly.

[flyboy62]

wat is the deminsions on the stock handle bars?