PDA

View Full Version : blaster carb question



honda450rider33
04-23-2007, 02:39 PM
i have a 2004 blaster and i put the injection block off on and ever since then if i do a wheely or hit a jump i have gas coming out of the side line on the carb the one right above where the clutch cable connects to, it runs fine but why does it do that it never did that before

blasterfreak99
04-23-2007, 02:47 PM
its probably your float sticking. it wouldnt have anything to do with your b/o kit. take off your bowl and spray it out with brake parts cleaner(or carb cleaner, its practically the same thing) and see if it helps.

honda450rider33
04-23-2007, 04:08 PM
i tried that and it still does it a little

pbblaster2
04-23-2007, 07:05 PM
once we put the b/o kit on it we changed carbs to a 28mm off a rm 85 so we could get rid of the trottle body from the injector maby try a diff carb if you have one

zedicus00
04-24-2007, 01:59 PM
did u seal the oil line hole to the carb good? if not maybe its messing up the presure inside the carb and making it overflow.

honda450rider33
04-24-2007, 02:20 PM
i put the orange cap that it came with on