PDA

View Full Version : Which Cams To Use.


rob-u/21
04-23-2007, 12:15 PM
Since my top end is off because I'm putting a new timming chain I am also thinking of droping a set of cams in. What are all of you using? What do you guys recomend? I currently have a complete LRD exhuast, Yosh CRB, JE 12.8-1 piston. Thanks.
suzukiray
04-23-2007, 05:42 PM
Call Web Cams & order the .390 lift cams. You will LIKE what they do! Ray.
czrider263
04-23-2007, 05:55 PM
If you run web get the cam welded because they tend to spin!
rob-u/21
04-24-2007, 08:41 AM
Call Web Cams & order the .390 lift cams. You will LIKE what they do! Ray.

Is the .390 lift a bottom to mid cam or a mid to top cam.
rob-u/21
04-24-2007, 08:43 AM
If you run web get the cam welded because they tend to spin!

Is that something that web cam will do, or do I have to get them welded on my own. Anyone else having this sliping problem on their LT-Rs'
czrider263
04-24-2007, 10:09 AM
Originally posted by rob-u/21
Is that something that web cam will do, or do I have to get them welded on my own. Anyone else having this sliping problem on their LT-Rs'

Yes when i sent back one of the cams that spun they fixed it and then welded it for me. I would do it on every new web cam just to be sure. And for if they happen i had 2 that did and chad also had 1 spin.
RAMIT
04-26-2007, 12:50 PM
What kind of price are we talking for the set of cams? Are we talking drop in or do we need to do further mods to make these work? Will this be a Low to Mid cam or Mid to High end cam?

Thanks,
Ramit
quad_racer_17
04-26-2007, 02:38 PM
boys watch girls get naked on web-cams:D
LTR450_#67
04-26-2007, 02:56 PM
The yoshi cams are drop in for sure. I think the web cams are too but not sure.