how i blocked the hotstart

[wrobben]

this is how i blocked the hotstart on my 450r carb

materials,
1- metric size 12 bolt with 1.25 pitch
a hacksaw
some teflon thread tape

ok all u need to do is put the bolt in a vise, cut it shorter with the hacksaw so it will fit good in the hot start hole.

then grab the tape, and go around the bolt 3-4 times

then simply put the bolt in the hotstart, u dont have to tighten it down that tight it wont go anywhere and will not leak.

well there u go a good way to block off a hotstart, this way is much better then using silicon.