here we go trentons T REX project

[cmiller120]

here it is the doner 2007 trx 90

[cmiller120]

the rear

[cmiller120]

here are some of the gussets

[cmiller120]

and more

[cmiller120]

the robs racing swinger

[cmiller120]

here is a pic of the pro fab front and the rath racing nerfs

[cmiller120]

the other side

[cmiller120]

here is the mod for the rear shock so the heel kicks would fit

[cmiller120]

here is the dura blue axle stock size should have went a couple more inches

[cmiller120]

opps hear it is

[cmiller120]

its getting there

[cmiller120]

other side

[cmiller120]

its done

[cmiller120]

damn the pro fab is wide

[cmiller120]

hear it is the 2007 honda T REX 90 coming to a track near you

[cmiller120]

i will be posting my feelings on this build soon. i learned a lot and spent a lot more money then i needed to so hopefully i can help someone save some money.

[cdevito]

Craig, what size tire and rim did you put on the rear??

[king219]

sweet ,everything looks great.these hondas look sick all done up

[king219]

Originally posted by cmiller120
i will be posting my feelings on this build soon. i learned a lot and spent a lot more money then i needed to so hopefully i can help someone save some money.

save money? you know we will spend it somewhere else on the bike!

[cmiller120]

the rear tires are 8x6 got them from rocky mountain atv they were like 23.00 each. and got the tires from a farm and fleet or tracktor store they are snow hogs used for a snow blower they kick a!$ and i paid 46.00 fo bolth but you can find them cheaper i have seen them as low as 19 a tire.

[cdevito]

With the new a-arms giving a total of 6"s wider, I went with 18x9.5x8 rims and tires using the offset of the rims to make up the difference of the spacers. I could only find 5" spacers(2 1/2"s a side) so the rims worked out pretty good(an extra 1/2" a side), but I'm worried about the extra drag from the bigger tires.

I did see those snow hogs in a mag, and cheap too.

[papasmurf]

Looks awesome on the build. I love the red and black combo!!

How much wider is the front end versus the rear end?

Why did you choose to go with Robbs Swing arm and Pro-Fab front end?

Thanks,

[cmiller120]

cost is the the only reason. i think i made the right choice though. this front end seems to work great. i havent taken it to a track yet but we have rode it in the yard and through a couple fields.the rear is about 5 inches less . i got the axle for cheap with the carrier so i bought it. im just going to get the hubs that have 2 + 2 and that will be close enough.

[racinmason911]

Rocky Mountain sells a +4 g-force axle for the 300ex that we use on our TRX 90. It's only $199.

[papasmurf]

I would like to hear your thoughts on your build process. I'm still gathering parts for ours and any insight would be very much appreciated.

[racinmason911]

here is a rough pic of ours. I'll get some good pics and a little write up about our build when I get the time.

[koh0001]

Sweet bike. looks like it turned out nice. And Thanks for the shock.