Teather switch

[seven]

What wire are you guys tying into for your teather switch? I just got mine today and trying to get it ready to ride

[dg26]

i just went to the wire on the right side of the quad while you are sitting on it, its white with a blue stripe, works fine, i just used one of those blue splice clips, took 5 min tops.

[DVXracer]

I bought a installation kit .

[LTandRaptorider]

What quad is the tether for? I ask because you post your question in the LT-R450 forum, but in your sig you have a YFZ450. If the tether is for an LT-R450, a normally closed circuit tether would be best for the EFI. Pingel sells these, as does Tucker through Rocky Mountain ATV. Pingel price = about $70, Rocky Mountain price = $19.99! With this type of tether, you merely wire it into your ignition wires from the ignition switch on handle bars. When you depart ways with your quad pulling the tether, it "opens" the circuit killing the engine.

[seven]

Its for the LTR 450.

[asjr39]

I connected mine to the white wire above the chain guard and it works really well.

[QIKLTR]

i connected mine to rollover kill box behind the headlight and it works great