PDA

View Full Version : May Quad of the Month entry thread, 200-350cc sport class.



TheFontMaster
04-17-2007, 03:45 PM
This month will be for 200-350cc sport class quads. Banshee's, 250r's and the like don't fall into this catagory. I will for this month only allow 20 quads to enter, due to how many I had enter in last years contest for this class. You have until next monday to enter. At that time if there are more than 20 quads entered, I will narrow it down to 20, and put up the poll.

As always here are the links to the rules, and the mods list that you all have to fill out, and post with your quad. Aslo, please read through all of the rules before you enter.

Rules,
http://www.exriders.com/vbb/showthread.php?s=&threadid=146713

Mods list,
http://www.exriders.com/vbb/showthread.php?s=&threadid=162941

Cody_300ex
04-17-2007, 04:05 PM
Chassis | Suspension | Controls:

Frame: Stock
A Arms: GDH Racing +3.5 Long Travel
Swingarm: Stock
Steering Stem: Stock
Stabilizer: N/a
Axle: Stock
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock
Bars: Factory 909
Throttle/Clutch Lever: Stock PCed\ Moose Racing
Grips: Scott
Nerfs: AC Racing Standard
Bumper: DG Standard
Grab Bar: Stock
Front Shocks: Polished YFZ Stockers
Rear Shock: Custom Axis single rate, Comp & Preload adj.
Brake Lines: Stainless steel
Rotors F|R: Stock
Rims F|R: ITP T-9\ Painted stock for MX\ Douglas .190ís for TT
Tires F|R: Fast Trekker fronts\ Kenda Knarly for MX \ American Racers For TT



Body:

Plastic: Cut OEM 250r White Fronts/ Ufo Red Rears
Graphics|Seat Cover: Ripped Stock
Number Backgrounds: N/A
Handguards: N/A
Bar Pad: Factory 909
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Weisco 11:1 Compression| TC Race Porting/Polishing, Oversized Valves, 5 angle valve job/ Kibble White H/d Valve springs
Bore & Stroke: 76mm & 65.5mm
Displacement: 298cc
Camshaft: Webcam Stage 3
Carburetor: Modded stock
Air Filter|Box: UNI | Modded Stock
Pipe|Silencer: WB S-bend | HMF Sport
Clutch|Plates: Stock|Stock
Gearing F|R: 15|38
CDI|Killswitch: Ricks | Pro design
Cooling: Air cooled
Other:

Cody_300ex
04-17-2007, 04:07 PM
picture 2

Cody_300ex
04-17-2007, 04:08 PM
Picture 3

Cody_300ex
04-17-2007, 04:09 PM
Picture 4 (TT Set-up)

Cody_300ex
04-17-2007, 04:10 PM
Picture 5

Cody_300ex
04-17-2007, 04:11 PM
Picture 6

Cody_300ex
04-17-2007, 04:12 PM
Picture 7 (last one)

AtvMxRider
04-17-2007, 06:32 PM
Chassis | Suspension | Controls:

Frame: stock
A Arms: Lonestar 400ex +2's w/ JB racing relocator
Swingarm:stock
Steering Stem: stock
Stbilizer: Denton
Axle: LSR +4
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: Renthal Black
Throttle/Clutch Lever: stock/ASV W/Hotstart as reverse
Grips: Tag
Nerfs: Tusk
Bumper: AC
Grab Bar: stock
Front Shocks: TCS Triple rate W/Rezzies
Rear Shock: Stock
Brake Lines: Streamline
Rotors F|R: stock
Rims F|R: stock
Tires F|R:Holeshot MXR6's



Body:

Plastic: Stock
Graphics|Seat Cover: Stock
Number Backgrounds: Hetricks
Handguards: dNone
Bar Pad: Renthal
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 300cc
Cam:Stock
Carburetor: Stock
Air Filter|Box: UNI
Pipe|Silencer: Curtis Sparks
Clutch|Plates: Stock
Gearing F|R: Stock
CDI|Killswitch: Pro Armor
Cooling: Stock with shrouds
Other:

pbblaster2
04-17-2007, 06:32 PM
Chassis | Suspension | Controls:

Frame: stock
A Arms: stock
Swingarm: snyder+3
Steering Stem: stock
Stbilizer: none
Axle: banshee
Carrier: 07yfz
Locknut: banshee-stock
Hubs F|R: front stock rear yfz
Bars: renthals
Throttle/Clutch Lever: stock/stock
Grips: scott
Nerfs: ac
Bumper: cobra
Grab Bar: stock/shortend
Front Shocks: stock
Rear Shock: stock
Brake Lines: lonestar
Rotors F|R: stock
Rims F|R: front stock rear itp baja
Tires F|R: front stock rear holeshots xcr



Body: stock

Plastic: stock
Graphics|Seat Cover: stock/andrewcycles
Number Backgrounds: none
Handguards: powermadds
Bar Pad: renthal
Fuel Tank: 88 blaster



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: stock
Cam:none 2 stroke
Carburetor:28mm rm 85
Air Filter|Box: uni stock
Pipe|Silencer: factory 7
Clutch|Plates: stock
Gearing F|R: 14/40
CDI|Killswitch: pro design
Cooling: air
Other:none

AtvMxRider
04-17-2007, 06:33 PM
pic 2

AtvMxRider
04-17-2007, 06:34 PM
pic 3

AtvMxRider
04-17-2007, 06:35 PM
pic 4

AtvMxRider
04-17-2007, 06:52 PM
pic 5

mojavedude
04-17-2007, 07:00 PM
1991 Kawasaki Mojave 250
its for sale!!!! pm me.

Chassis | Suspension | Controls:

Frame: stock
A Arms: stock
Swingarm: stock
Steering Stem: stock
Stbilizer: n/a
Axle: stock
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: stock
Throttle/Clutch Lever:stock
Grips: scott
Nerfs: DG Alloy
Bumper: moto sport outlet, custom mounts
Grab Bar: stock
Front Shocks: progressive duel rates, shock covers
Rear Shock: stock, shcok cover
Brake Lines: stock
Rotors F|R: stock/stock
Rims F|R: stock/stock
Tires F|R: carlisle/carlisle



Body:

Plastic: stock
Graphics|Seat Cover: stock
Number Backgrounds: n/a
Handguards: powermadd with billet aluminum mounts
Bar Pad: renthal
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: 248cc
Cam: stock
Carburetor: stock
Air Filter|Box:k&n clamp on filter/ outerwears custom make box
Pipe|Silencer: white bros e-series slip on with custom pipe guard
Clutch|Plates: stock
Gearing F|R: 13/43
CDI|Killswitch: stock/tether
Cooling: stock water
Other: moose e-brake block off

good luck to everyone, im sure there will be some nice quads!!!

http://i12.photobucket.com/albums/a244/mojavedude250/mojave/6532879007-1.jpg

http://i12.photobucket.com/albums/a244/mojavedude250/mojave/mojave250003.jpg

http://i12.photobucket.com/albums/a244/mojavedude250/mojave/mojave250005.jpg

http://i12.photobucket.com/albums/a244/mojavedude250/mojave/mojave250006.jpg

http://i12.photobucket.com/albums/a244/mojavedude250/mojave/mojave250008.jpg

http://i12.photobucket.com/albums/a244/mojavedude250/mojave/Rays015.jpg

http://i12.photobucket.com/albums/a244/mojavedude250/mojave/snowing003001_0001.jpg

http://i12.photobucket.com/albums/a244/mojavedude250/mojave/77010_0001.jpg

XCAdam89
04-17-2007, 08:00 PM
Not quite everything in the pics, I'll get some updated one's this week!
http://i11.photobucket.com/albums/a185/D6Adam/AdamBD6.jpg
http://i11.photobucket.com/albums/a185/D6Adam/3001.gif
http://i11.photobucket.com/albums/a185/D6Adam/Adam300.gif

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Stock
Swingarm: Stock
Steering Stem: Lonestar
Stbilizer: None
Axle: Stock
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock
Bars: Renthal Standard
Throttle/Clutch Lever: Stock PC'ed/Polished
Grips: Scott
Nerfs: AC
Bumper: AC
Grab Bar: AC Wide
Front Shocks: Works Dual Rate w/ Res
Rear Shock: Works Quadstart w/ Res.
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: Douglas .190
Tires F|R: ITP Holeshot XC



Body:

Plastic: Stock
Graphics|Seat Cover: Ceet
Number Backgrounds: None
Handguards: Cycra Stealth DX
Bar Pad: Renthal
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 287cc
Cam: Stock
Carburetor: Stock
Air Filter|Box: Stock, no lid.
Pipe|Silencer: White Bros. full system
Clutch|Plates: stock
Gearing F|R: 13/37
CDI|Killswitch: Sparks/Pro Armor
Cooling: Air-Cooled
Other: Tinner Air-Scoops, Misc. polished/powdercoated parts, Racing Seat Latch, AC Swingarm and Body Skids.

Xater
04-18-2007, 07:26 AM
Chassis | Suspension | Controls:

Frame: stock
A Arms: stock
Swingarm: stock
Steering Stem: stock
Stbilizer: stock
Axle: durablue eliminator
Carrier: RAD twin row
Locknut: durablue
Hubs F|R: stock
Bars: stock
Throttle/Clutch Lever: stock
Grips: aftermarket
Nerfs: none
Bumper: DG
Grab Bar: DG
Front Shocks: stock
Rear Shock: stock
Brake Lines: motion pro
Rotors F|R: none
Rims F|R: stock/ITP
Tires F|R: stock/razr



Body:

Plastic: stock
Graphics|Seat Cover: stickers
Number Backgrounds: none
Handguards: none
Bar Pad: stock
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: stock
Cam: none
Carburetor: carbon fiber reeds w/ spacer 30mm oko
Air Filter|Box: uni/no lid
Pipe|Silencer: LRD RFX
Clutch|Plates: stock
Gearing F|R: 13/40
CDI|Killswitch: stock w/removed TORS
Cooling: stock
Other: DID o-ring chain, injector removed

http://i65.photobucket.com/albums/h209/xater_ownage/100_0048internet.jpg

http://i65.photobucket.com/albums/h209/xater_ownage/100_0047internet.jpg

http://i65.photobucket.com/albums/h209/xater_ownage/100_0046internet.jpg

http://i65.photobucket.com/albums/h209/xater_ownage/100_0045internet.jpg

klutchbuster250
04-18-2007, 01:27 PM
Chassis | Suspension | Controls:

Frame: stock
A Arms: stock Swingarm:stock
Steering Stem: stock
Stbilizer:
Axle: stock, with durablue spacers Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: stock Black
Throttle/Clutch Lever: stock
Grips: stock
Nerfs: Tusk
Bumper: stock Grab Bar: stock
Front Shocks: stock
Rear Shock: Stock
Brake Lines:stock
Rotors F|R: stock
Rims F|R: stock
Tires F|R:kend radial front, razers in rear


Body:

Plastic: Stock
Graphics|Seat Cover: Stock
Number Backgrounds: Handguards: powermade
Bar Pad:
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 250cc
Cam:Stock
Carburetor: Stock
Air Filter|Box: UNI
Pipe|Silencer: hmf full system
Clutch|Plates: Stock
Gearing F|R: Stock
CDI|Killswitch:
Cooling: Stock
Other:

klutchbuster250
04-18-2007, 01:29 PM
2

klutchbuster250
04-18-2007, 01:34 PM
3

klutchbuster250
04-18-2007, 02:18 PM
<a href="http://photobucket.com" target="_blank"><img src="http://i116.photobucket.com/albums/o7/lilpops93/250.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

04-18-2007, 05:34 PM
wow this is really pathetic. there has to be better ones out there. so far there is only 1 nice one

m.h.s.c.#527
04-18-2007, 08:24 PM
ill add ones in daylight these pics were taken after all the painting



Chassis | Suspension | Controls:

Frame: stock
A Arms: stock
Swingarm:stock
Steering Stem: stock
Stbilizer:
Axle: stock
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: Fly aero flex
Throttle/Clutch Lever: stock
Grips: tag ultra soft
Nerfs: DG fat series
Bumper:V pro
Grab Bar: stock, painted
Front Shocks: elka with preload and compression
Rear Shock: Stock
Brake Lines:stock
Rotors F|R: stock
Rims F|R: hipers
Tires F|R:razr 2s all the way around


Body:

Plastic: Stock
Graphics|Seat Cover: Stock
Number Backgrounds: decal works on the # plate
Handguards: cycra probend
Bar Pad: fly
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 250cc
Cam:Stock
Carburetor: Stock
Air Filter|Box: UNI
Pipe|Silencer: hmf full system
Clutch|Plates: Stock
Gearing F|R: Stock
CDI|Killswitch: N/A
Cooling: Stock
Other:tusk gas cap, all skid plates, custom welded heel guards,

m.h.s.c.#527
04-18-2007, 08:25 PM
2

m.h.s.c.#527
04-18-2007, 08:27 PM
3

elementryder
04-19-2007, 02:47 PM
Chassis | Suspension | Controls:

Frame: stock 05
A Arms: Burgard +5 LT
Swingarm: Burgard +1 3/4 LT
Steering Stem: Stock
Stbilizer: Burgard
Axle: Lonestar
Carrier: Burgard
Locknut: Rpm
Hubs F|R: Stock pc'd
Bars: Fasst Flex
Throttle/Clutch Lever: Stock/Asv
Grips: Oury
Nerfs: Ac Pc'd
Bumper: Rath
Grab Bar: Dommel Racing
Front Shocks: Axis Lt
Rear Shock: Axis Lt
Brake Lines: Streamline
Rotors F|R: stock
Rims F|R: Hiper
Tires F|R: Razr



Body:

Plastic: Blue Maier
Graphics|Seat Cover: Ceet Confeterate flag
Number Backgrounds: None
Handguards: Powermad
Bar Pad: Fasst Flex
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: TC
Bore & Stroke:
Displacement: 300
Cam: TC
Carburetor: Lectron
Air Filter|Box: K&N/ Dommel Racing
Pipe|Silencer: TC
Clutch|Plates: stock
Gearing F|R: 14/36
CDI|Killswitch: Pro Desing
Cooling: Air
Other:
Thanks to my 07 sponsors
BURGARD CYCLE
DUNCAN RACING
GT-THUNDER
HETRICK RACING
RATH RACING
EAST COAST ATV
K&K ATV

elementryder
04-19-2007, 02:50 PM
2

ECATV Raptor
04-19-2007, 03:49 PM
Chassis | Suspension | Controls:

Frame: stock
A Arms: +2.5 durablue spacers
Swingarm: stock
Steering Stem: stock
Stbilizer: none
Axle: +2.5 durablue spacers
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: Pro Taper
Throttle/Clutch Lever: Stock
Grips: Scott
Nerfs: none
Bumper: DG
Grab Bar: Pro Taper
Front Shocks: stock
Rear Shock: stock
Brake Lines: stock
Rotors F|R: stock
Rims F|R: Douglas Red Labels/ Douglas Ultimate Beadlocks
Tires F|R: ITP Holeshot XCR's



Body:

Plastic: stock
Graphics|Seat Cover: stock
Number Backgrounds: none
Handguards: none yet
Bar Pad: Pro Taper
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: 248
Cam: stock
Carburetor: stock
Air Filter|Box: White Bros Power Filter
Pipe|Silencer: White Bros E-series (not pictured)
Clutch|Plates: EBC
Gearing F|R: stock
CDI|Killswitch: none
Cooling: stock
Other: Baja swingarm skidplate

ECATV Raptor
04-19-2007, 03:51 PM
#2

ECATV Raptor
04-19-2007, 03:52 PM
#3

ECATV Raptor
04-19-2007, 03:53 PM
#4

ECATV Raptor
04-19-2007, 03:55 PM
#5

hetrick_racing9
04-19-2007, 04:40 PM
2005 National Race Machine

..Thaught Id Giver A try.. 450 will be in 450 one soon..


Chassis | Suspension | Controls:

Frame: Powder Coated /Gusseted
A Arms: +2 +1 eyeball engeenering
Swingarm: +2 Lonestar Racing
Steering Stem: Stock
Stbilizer:
Axle: Lonestar Racing +2 +4
Carrier: Lonestar Racing
Locknut:
Hubs F|R:
Bars: Renthal
Throttle/Clutch Lever: Cascade Extended throttle
Grips: Renthal
Nerfs: Ac Racing
Bumper: Ac Racing
Grab Bar:
Front Shocks: Pep Triple Rate W/ Remote Rezzies ..Zps
Rear Shock: Pep Double Rate W/ Remote Rezzie.. Zps
Brake Lines: Streamline Beaded
Rotors F|R: Ebc break pads
Rims F|R: Douglas
Tires F|R: Holeshots



Body:

Plastic: Majer Racing front fenders
Graphics|Seat Cover: Ceet Flame Gripper Seat
Number Backgrounds: Nacs Racing
Handguards: Ufo
Bar Pad: Renthal
Fuel Tank:



Engine|Drive System:

Cylinder|Head: Duncan Racing National Kit
Bore & Stroke: Stock/Stock
Displacement:
Cam:
Carburetor: Keighn carb
Air Filter|Box: Project blaster aluminum Airbox/Uni airfilter
Pipe|Silencer: Hetrick Racing
Clutch|Plates: Hinson
Gearing F|R: +1 in the front
CDI|Killswitch: Pro Design
Cooling:
Other:Other Stuff


http://img252.imageshack.us/img252/8420/762326125l1xt5.jpg (http://imageshack.us)

http://img252.imageshack.us/img252/8443/762320630l1gv3.jpg (http://imageshack.us)


http://img217.imageshack.us/img217/2915/762319431l1hg0.jpg (http://imageshack.us)

m.h.s.c.#527
04-19-2007, 09:39 PM
more 1

m.h.s.c.#527
04-19-2007, 09:40 PM
more 2

blasterfreak99
04-19-2007, 09:42 PM
Chassis | Suspension | Controls:

Frame:Stock
A Arms:Stock
Swingarm:Hekbound(not pictured)
Steering Stem:none
Stbilizer:none
Axle:durablue +2
Carrier:stock
Locknut:durablue
Hubs F|R: F=stock/R=duarblue
Bars:MSR
Throttle/Clutch Lever:stock
Grips:Renthal med.
Nerfs: DG
Bumper: stock
Grab Bar: DG
Front Shocks:stock
Rear Shock:stock
Brake Lines:stock
Rotors F|R:stock
Rims F|R:stock/douglas .190
Tires F|R:stock/itp holeshots



Body:

Plastic:shaved stock
Graphics|Seat Cover:stock
Number Backgrounds:stock
Handguards: none
Bar Pad:MSR
Fuel Tank:stock



Engine|Drive System:

Cylinder|Head:Airsal 140 Firebreather
Bore & Stroke:72/60
Displacement:244
Cam:hot cams...lol
Carburetor:Keihin 35mm Airstriker
Air Filter|Box:Uni/Project Blaster aluminum airbox
Pipe|Silencer:Factory7
Clutch|Plates:PE racing billet clutch basket/ EBC clutch kit
Gearing F|R:14/38 (stock is 13/40)
CDI|Killswitch:stock
Cooling:stock
Other:+3mm stroker, timing advance key, cut head for stroker, and EBC brakes.

MORE COMING!!!

http://i176.photobucket.com/albums/w196/blasterfreak99/DSCI0120.jpg

http://i176.photobucket.com/albums/w196/blasterfreak99/DSCI0121.jpg

http://i176.photobucket.com/albums/w196/blasterfreak99/DSCI0125.jpg

http://i176.photobucket.com/albums/w196/blasterfreak99/DSCI0124.jpg

http://i176.photobucket.com/albums/w196/blasterfreak99/DSCI0123.jpg

http://i176.photobucket.com/albums/w196/blasterfreak99/DSCI0122.jpg

http://i176.photobucket.com/albums/w196/blasterfreak99/DSCI0126.jpg

http://i176.photobucket.com/albums/w196/blasterfreak99/DSCI0127.jpg

http://i176.photobucket.com/albums/w196/blasterfreak99/DSCI0128.jpg

and here's (http://s176.photobucket.com/albums/w196/blasterfreak99/?action=view&current=DSCI0300.flv) a video of when it was stock.

m.h.s.c.#527
04-19-2007, 09:43 PM
more 3

IOWAracer
04-19-2007, 10:25 PM
Chassis | Suspension | Controls:

Frame: Stock
A Arms: Stock
Swingarm: stock
Steering Stem: stock
Stbilizer: none
Axle: stock
Carrier: stock
Locknut: none
Hubs F|R: stock
Bars: Moose
Throttle/Clutch Lever: Motion Pro
Grips: oury
Nerfs: none
Bumper: PRM Summit
Grab Bar: PRM Desert
Front Shocks: stock
Rear Shock: stock revalve
Brake Lines: stock
Rotors F|R: stock
Rims F|R: DWT
Tires F|R: Maxxis Razr



Body: Maier Blaster Hood

Plastic: stock
Graphics|Seat Cover: None
Number Backgrounds: none
Handguards: Powermadd
Bar Pad: Moose
Fuel Tank: stock



Engine|Drive System: High Comp. piston

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: 350
Cam:Hotcam
Carburetor: 40mm Mikuni
Air Filter|Box: K&N
Pipe|Silencer: HMF
Clutch|Plates: stock
Gearing F|R: stock
CDI|Killswitch: Pro design
Cooling: None
Other:



http://i5.photobucket.com/albums/y155/gettinbeat/Picture108.jpg http://i5.photobucket.com/albums/y155/gettinbeat/warrior.jpg

remix92
04-20-2007, 11:00 AM
Chassis | Suspension | Controls:

Frame: stock
A Arms: burgard
Swingarm: Custom +2
Steering Stem: stock
Stbilizer: stock
Axle: durablue eliminator
Carrier: RAD twin row
Locknut: durablue
Hubs F|R: stock
Bars: Pro Taper
Throttle/Clutch Lever: stock
Grips: Scott
Nerfs: Dg
Bumper: AC racing
Grab Bar: DG
Front Shocks: Works powdercoated red and yellow
Rear Shock: Works powdercoated red
Brake Lines: motion pro
Rotors F|R: none
Rims F|R: douglas/ITP
Tires F|R: douglas/ITP



Body:

Plastic: Maier
Graphics|Seat Cover: None
Number Backgrounds: none
Handguards: none
Bar Pad: Pro taper
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: Ported and polished
Bore & Stroke: .020
Displacement: idk
Cam: none
Carburetor: carbon fiber reeds w/ spacer 30mm oko
Air Filter|Box: uni-no lid
Pipe|Silencer: Full Toomey B1
Clutch|Plates: stock
Gearing F|R: 13/40
CDI|Killswitch: Pro Design
Cooling: stock
Other: DID o-ring chain, oil injection removed


http://img337.imageshack.us/img337/2236/mynewblasterou6.th.jpg (http://img337.imageshack.us/my.php?image=mynewblasterou6.jpg)


http://img135.imageshack.us/img135/7121/new1qt7.th.jpg (http://img135.imageshack.us/my.php?image=new1qt7.jpg)

http://img408.imageshack.us/img408/3527/new2yx8.th.jpg (http://img408.imageshack.us/my.php?image=new2yx8.jpg)

http://img408.imageshack.us/img408/1047/new3eb3.th.jpg (http://img408.imageshack.us/my.php?image=new3eb3.jpg)

300ex_#387
04-22-2007, 12:52 PM
Chassis | Suspension | Controls:

Frame: PC'd Candy blue
A Arms: PRP 400ex +3 LT
Swingarm: Lonestar +2
Steering Stem: Stock PC'd black
Stbilizer: none
Axle: Lonestar
Carrier: Lonestar
Locknut: Stock
Hubs F|R: 250r, stock
Bars: Magura
Throttle/Clutch Lever: Msr
Grips: Renthal
Nerfs: DG
Bumper: Ac Stadium
Grab Bar: Stock
Front Shocks: LT PEP
Rear Shock: Raptor
Brake Lines: Galfier braided steel
Rotors F|R: 250r stock
Rims F|R: Baja, stock
Tires F|R: Razr mx



Body:

Plastic: Maier Low profile
Graphics|Seat Cover: Ceet confederate flag
Number Backgrounds: Nacs
Handguards: None
Bar Pad: Magura
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Ported and Polished
Bore & Stroke:
Displacement: 297
Cam: Hot Cam
Carburetor: 400ex
Air Filter|Box: Twin air
Pipe|Silencer: Scorpion shorty
Clutch|Plates: Barnett HD
Gearing F|R: 14/36
CDI|Killswitch: White bros, Pro design
Cooling:
Other: Air scoops

300ex_#387
04-22-2007, 01:05 PM
2

300ex_#387
04-22-2007, 01:07 PM
3

300ex_#387
04-22-2007, 01:09 PM
4

bcmx8
04-22-2007, 07:38 PM
300ex

Chassis | Suspension | Controls:

Frame: stock painted black
A Arms: GDH long travel
Swingarm: lonestar +2
Steering Stem: stock painted
Stbilizer: none
Axle: lonestar
Carrier: lonestar twin row
Locknut: lonestar anit-fad
Hubs F|R: stock
Bars: universal cr-high
Throttle/Clutch Lever: asv
Grips: spider
Nerfs: ac
Bumper: ac
Grab Bar: ac
Front Shocks:elka piggyback/comp adj.
Rear Shock: elka comp adj.
Brake Lines:Streamline Beaded
Rotors F|R: stock
Rims F|R: hiper
Tires F|R: itp mxr6



Body:

Plastic: maier white
Graphics|Seat Cover: spastic
Number Backgrounds: spastic
Handguards: powermadd
Bar Pad: fx
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: ported/polished
Bore & Stroke: .06
Displacement: 297
Cam: TC
Carburetor: lectron
Air Filter|Box: uni
Pipe|Silencer: TC
Clutch|Plates: dirt digger
Gearing F|R: 14/36
CDI|Killswitch: pro design
Cooling:
Other:
Ac skid plate
DID chain
TC CDI
TC valve springs


http://img.photobucket.com/albums/v206/racer234/DSC01201.jpg

http://img.photobucket.com/albums/v206/racer234/DSC01204.jpg

http://img.photobucket.com/albums/v206/racer234/DSC01199.jpg

http://img.photobucket.com/albums/v206/racer234/DSC01196.jpg

http://img.photobucket.com/albums/v206/racer234/DSC01198.jpg

http://img.photobucket.com/albums/v206/racer234/DSC01210.jpg

born2ride14
04-23-2007, 03:14 PM
all mods in sig plus new itp holeshot mxr4 tires and itp polished wheels

born2ride14
04-23-2007, 03:15 PM
last one

born2ride14
04-23-2007, 03:16 PM
i lied heres one more the last one 9 i hope

Kickstarts-suck
04-23-2007, 04:48 PM
Originally posted by 300ex_#387
4

all the rebel flag stuff looks sweet :eek2: