Cody_300ex
04-17-2007, 10:59 AM
[B]NO LOWBALL OFFERS!!!
Motor W/ Carb & Electronics The motor was rebuilt last summer at the beginning of June. The head was redone by Tom Clarson himself, The head was completely redone, He put in 2.5mm OS intake valves, Full race porting and polishing, new exhaust valves, new valve guides, & new valve seals. It cost me about 700 bucks in the end, just for the head. The jug & sleeve where milled down .020 to bump up the compression a bit. A Wiesco .080 was 11:5:1 piston installed, a Web Stage 3 (.335 Lift) cam, Kibblewhite H/d valve springs, and Webcam Hardened rockers. The motor has 2 TT races and about 25-30 riding hours AT the most! The motor comes with a stock carb with the choke removed and jetted just right for the motor. It also comes with the whole wiring harness. This motor Runs EXTREMELY well for a 300ex motor pulls the front wheels off the ground in 2nd and 3rd with 15/33 gearing. Still has great compression. I really hate to get rid of it but its just time for me to move up. I forgot to add that about a month after the motor was finshed I put a Brand new OEM clutch basket which I had lightened and resurfaced along with a new clutch and HD clutch springs. A new cam chain was Installed when the motor was rebuilt. $1,150 + shipping firm. SOLD!!!
Polished 05 Yfz Stock Shocks Very good condition, good compression, paint on the springs is still in pretty good condition Compression and rebound Adjustable. The piggybacks are polished to a mirror like reflection. 205 shipped obo SOLD!!!
GDH Racing +3.5 Longtravel A-arms Powder coated bright Red, Accept 400ex length shocks. The PC is in average shape. Very strong and rare a-arms, Like 1 of 15 pairs if that. With 2/3 offset wheels it is right at 49.5 and lowered down for TT Its right under 50 Inches. I have owned them since about april of last year. They also have special mounts for a swaybar. Also if you get a Shock relocator you can run 19.5 and 20 inch shocks on it depending on the relocator. In my opinion and from my experience when these a-arms are mated with the right shocks it cant be beaten, its the best front end on the market for the 300ex. 385 shipped firm
Frame- Pretty good frame, no cracks or breaks, structually sound. Needs a PC or paint job. No title but I do have the bill of sale. I Will Rubber coat it for an extra 35 bucks. Make Decent Offer
Stock Swing arm Good Structural shape, no cracks or breaks, no stripped bolt holes. Just needs some PC or Rubber coat. Will rubber coat it for an extra 10 bucks. SOLD
Axis Rear Shock - Single rate, compression adj. Valved for a 150lb MX rider. Great shape, never actually rode MX with it. Has good compression long enough rezzie line to reach the front of the bike. Like new. 265 shipped SOLD
Stock rear shock Good shape, not blown. 55 shipped.
Stock Gas tank W/ Polished Gas cap - Nice shape, not any leaks. There is one dent at the very top of the tank. Some slight wear on the paint but very structually sound. Comes with the petcock and the plastic peice used to adjust it. Make Offer
HMF Slip-on w/ a WB S-bend head pipe - The HMF can has been Polished to a mirror finsh. Comes with the spark arrestor. 305+ shipping Firm SOLD
Stock Rear Plastic w/ brace - ok shape, has a few white spots, and quite a few scratches. No cracks or breaks tho. Red. 95 + shipping
Stock steering Stem - Striaght, good shape, will include polished Handlebar clamps & bolts. 65 shipped
Stock Axle - Straight, no bends or cracks, semi polished. 80 shipped obo SOLD
White 250r race cut front Fenders w/ red hood - Hood is in great shape but the Fenders are about shot. Good structual Shape but just rough looking, would look fine with a little bit of sanding. Will include the adapters to put on a 300ex. 40 + shipping
Red Maier 300ex Race cut fenders w/ extensions - Faded a little bit but no major scratches and no breaks, cracks, or stress marks. 95 shipped
Durablue Rear lowering kit - Comes with all hardware, in good shape. 40 shipped
Complete Brake system Front only - Extremly good presure, decent pads, no leaks what so ever, No bleeding needed. Comes with SS front brake lines, Calipers, rear lines, Both master Cylinders, everything, even the rotors if ya want em - MAKE OFFERS!!
Footpegs - Painted with 2 layers of Rubbercoat, Freshly, sharpened, no cracks, good condition - 45 shipped
Megacycle Race Profile Billet cam - .370 Valve Lift .272 Duration @ 40 Degrees. Has about 75 hours on it. Very good shape. Good powerful cam. Does not require hardened Rockers - 120 shipped firm
Full chain and sproket set - A 13 & a 15 tooth front sproket, a 38 & 33 tooth Rear sproket, and a DID O-ring chain that has maybe 10 hours on it at the most. - Make offers
Stock Skid Modded Swingarm Skid Plate - Welded 10 gauge metal to it to strengthen it up, Rubbercoated black, looks like new. - Make offer
Front Hubs - I have three of them. Bearings and studs where replaced in two a year ago. The color is also in great shape also. - Make Offer
Stock Honda Throttle Housing - The Top is PCed chrome, The body is fire Red, and the clamp is prism Black. Very smooth, a little wear but not to bad. - 45 shipped obo
Stock 300ex Tie rods - Polished, straight where used for maybe one year. Never Bent. - 15 shipped
400ex Triple Rate Works shocks - One shock is fine, the other will need a shaft, spring retainer, rubber bumper, and the washers. The bodies have been poilshed. Works quoted me 75-90 bucks including labor to fix. - $75 shipped
Any Other part you can think of, Just ask, I will more than likly have it if it isnt already sold. I will consider trades expessially for LTR parts
You can call my Cell 1-270-210-8952 After 3:00pm about any parts for a 300ex you could possibly need.
Just ask about anything else, I have a garage full of parts for it....
UPDATED AND PRICES REDUCED 5/25/07
Links to Pics...
http://www.exriders.com/vbb/attachment.php?s=&postid=2668740
http://www.exriders.com/vbb/attachment.php?s=&postid=2674988
http://www.exriders.com/vbb/attachment.php?s=&postid=2675037
http://www.exriders.com/vbb/attachment.php?s=&postid=2675034
Motor W/ Carb & Electronics The motor was rebuilt last summer at the beginning of June. The head was redone by Tom Clarson himself, The head was completely redone, He put in 2.5mm OS intake valves, Full race porting and polishing, new exhaust valves, new valve guides, & new valve seals. It cost me about 700 bucks in the end, just for the head. The jug & sleeve where milled down .020 to bump up the compression a bit. A Wiesco .080 was 11:5:1 piston installed, a Web Stage 3 (.335 Lift) cam, Kibblewhite H/d valve springs, and Webcam Hardened rockers. The motor has 2 TT races and about 25-30 riding hours AT the most! The motor comes with a stock carb with the choke removed and jetted just right for the motor. It also comes with the whole wiring harness. This motor Runs EXTREMELY well for a 300ex motor pulls the front wheels off the ground in 2nd and 3rd with 15/33 gearing. Still has great compression. I really hate to get rid of it but its just time for me to move up. I forgot to add that about a month after the motor was finshed I put a Brand new OEM clutch basket which I had lightened and resurfaced along with a new clutch and HD clutch springs. A new cam chain was Installed when the motor was rebuilt. $1,150 + shipping firm. SOLD!!!
Polished 05 Yfz Stock Shocks Very good condition, good compression, paint on the springs is still in pretty good condition Compression and rebound Adjustable. The piggybacks are polished to a mirror like reflection. 205 shipped obo SOLD!!!
GDH Racing +3.5 Longtravel A-arms Powder coated bright Red, Accept 400ex length shocks. The PC is in average shape. Very strong and rare a-arms, Like 1 of 15 pairs if that. With 2/3 offset wheels it is right at 49.5 and lowered down for TT Its right under 50 Inches. I have owned them since about april of last year. They also have special mounts for a swaybar. Also if you get a Shock relocator you can run 19.5 and 20 inch shocks on it depending on the relocator. In my opinion and from my experience when these a-arms are mated with the right shocks it cant be beaten, its the best front end on the market for the 300ex. 385 shipped firm
Frame- Pretty good frame, no cracks or breaks, structually sound. Needs a PC or paint job. No title but I do have the bill of sale. I Will Rubber coat it for an extra 35 bucks. Make Decent Offer
Stock Swing arm Good Structural shape, no cracks or breaks, no stripped bolt holes. Just needs some PC or Rubber coat. Will rubber coat it for an extra 10 bucks. SOLD
Axis Rear Shock - Single rate, compression adj. Valved for a 150lb MX rider. Great shape, never actually rode MX with it. Has good compression long enough rezzie line to reach the front of the bike. Like new. 265 shipped SOLD
Stock rear shock Good shape, not blown. 55 shipped.
Stock Gas tank W/ Polished Gas cap - Nice shape, not any leaks. There is one dent at the very top of the tank. Some slight wear on the paint but very structually sound. Comes with the petcock and the plastic peice used to adjust it. Make Offer
HMF Slip-on w/ a WB S-bend head pipe - The HMF can has been Polished to a mirror finsh. Comes with the spark arrestor. 305+ shipping Firm SOLD
Stock Rear Plastic w/ brace - ok shape, has a few white spots, and quite a few scratches. No cracks or breaks tho. Red. 95 + shipping
Stock steering Stem - Striaght, good shape, will include polished Handlebar clamps & bolts. 65 shipped
Stock Axle - Straight, no bends or cracks, semi polished. 80 shipped obo SOLD
White 250r race cut front Fenders w/ red hood - Hood is in great shape but the Fenders are about shot. Good structual Shape but just rough looking, would look fine with a little bit of sanding. Will include the adapters to put on a 300ex. 40 + shipping
Red Maier 300ex Race cut fenders w/ extensions - Faded a little bit but no major scratches and no breaks, cracks, or stress marks. 95 shipped
Durablue Rear lowering kit - Comes with all hardware, in good shape. 40 shipped
Complete Brake system Front only - Extremly good presure, decent pads, no leaks what so ever, No bleeding needed. Comes with SS front brake lines, Calipers, rear lines, Both master Cylinders, everything, even the rotors if ya want em - MAKE OFFERS!!
Footpegs - Painted with 2 layers of Rubbercoat, Freshly, sharpened, no cracks, good condition - 45 shipped
Megacycle Race Profile Billet cam - .370 Valve Lift .272 Duration @ 40 Degrees. Has about 75 hours on it. Very good shape. Good powerful cam. Does not require hardened Rockers - 120 shipped firm
Full chain and sproket set - A 13 & a 15 tooth front sproket, a 38 & 33 tooth Rear sproket, and a DID O-ring chain that has maybe 10 hours on it at the most. - Make offers
Stock Skid Modded Swingarm Skid Plate - Welded 10 gauge metal to it to strengthen it up, Rubbercoated black, looks like new. - Make offer
Front Hubs - I have three of them. Bearings and studs where replaced in two a year ago. The color is also in great shape also. - Make Offer
Stock Honda Throttle Housing - The Top is PCed chrome, The body is fire Red, and the clamp is prism Black. Very smooth, a little wear but not to bad. - 45 shipped obo
Stock 300ex Tie rods - Polished, straight where used for maybe one year. Never Bent. - 15 shipped
400ex Triple Rate Works shocks - One shock is fine, the other will need a shaft, spring retainer, rubber bumper, and the washers. The bodies have been poilshed. Works quoted me 75-90 bucks including labor to fix. - $75 shipped
Any Other part you can think of, Just ask, I will more than likly have it if it isnt already sold. I will consider trades expessially for LTR parts
You can call my Cell 1-270-210-8952 After 3:00pm about any parts for a 300ex you could possibly need.
Just ask about anything else, I have a garage full of parts for it....
UPDATED AND PRICES REDUCED 5/25/07
Links to Pics...
http://www.exriders.com/vbb/attachment.php?s=&postid=2668740
http://www.exriders.com/vbb/attachment.php?s=&postid=2674988
http://www.exriders.com/vbb/attachment.php?s=&postid=2675037
http://www.exriders.com/vbb/attachment.php?s=&postid=2675034