Parting 87 mx 330r

[LathersR]

87 250r ESR 330 motor TRX7 porting
+2+1 a arms
PEP suspension
+4 durablue axle
+1 lonestar steering stem
beadlocks
holeshots
ac bumper
paul turner pipes
red maier race plastics
The frame is a brand new but used very little 250r frame in perfect condition and gussetted.

Serious people only.. Will get pictures up tomorrow when I go down to my shop.

[guggi102]

how much for the coil?

[LathersR]

Ya I should have mentioned before. Not parting until the engine is sold.

[esr250r86]

what size beadlocks?brand?pics? Do they come with tires? price?

[LathersR]

Front 10" beads, rear 10" beads.. holeshot's all the way around.. 80% tread will not separate rims and tires. Champion bead's.. 225.00 a set. Good condition.. will have pics tomorrow I said

[norcalduner]

please send pics of motor to norcalduner@hotmail.com.

[TheLadiesMan]

how much for:

motor- how manyhours on it? what bore is the cylinder on?
axle- is it straignt?
a-arms- what brand

[LathersR]

Pictures I will get and probably have later this afternoon.

Axle is straight - 150.00 really clean
A-arms have no sticker or anything, I'm going to have to look into them or get ahold of the kid who had it before me. I have no idea what they are. Nice arms but first 250.00 takes them with tie rods.
Motor is on it's first bore probably 10 hours on the top at the absolute most.
Bottom end is very clean fresh oil after every other ride or so..
Will sell Complete motor with carb, pipes, electronics or just the motor.. shoot me an offer

[brokenbones]

is the 330 a bolt on

what bore and is the bottom end stock

[LathersR]

No you need to bore your cases..Stock bore, pretty much stock bottom end

[my88r]

man didnt you just bulid this why you partin it

[LathersR]

Nah that's my race bike your talking about.. I have 2 r's..

[800screws]

is the whole engine sold? i think u emailed me that the bottem end is sold, did that go through?

[LathersR]

That's to my MX 86 250r.. this engine is still complete

[moneypit]

how much for the rear shock?

[josephnone]

when do you think you'll have pics of the bike up? I am interested in the plastics. what do you want for them and what would shipping be to azusa, ca. 91702?

[mineralgrey01gt]

i need the front and top motor mounts, how much for those? How much for the gastank mounts?

[Zilla36deuce]

YGPM

[fast426]

do you have a stock rear shock?
thanks

[01bansheefox]

That axle come with hubs/sprocket hub??

[BIGBOSS 6X6]

what you got and how much shipped to 38343, i need somehting on +2 +1 lonestar arms

[LathersR]

Sold the whole bike. Thanks