PDA

View Full Version : will start in N, but wont start in gear???



jbplayfz450
04-15-2007, 12:28 AM
When the quads in neutral it starts fine. When its in gear, I hit the button and the neutral light comes on and nothing happens. I have changed out the CDI and the little blue wired neutral switch that goes under the shifter. Neither helped...

I have pulled the switch out of the clutch lever and ran those wires together and that didnt help either...

Has anybody got any ideas what might be the problem?

It's a stock 2004 with a Rekluse clutch.

Any advise would be appreciated.

dr.dyfz
04-15-2007, 07:37 AM
mine did something similar once. check by the battery there is a plugin if it is unplugged thats your problem. thats what i did and it fixed it.

woodsrider4ever
04-15-2007, 10:50 AM
mabe the nutral safety switch is bad?

jbplayfz450
04-17-2007, 02:43 PM
Originally posted by dr.dyfz
mine did something similar once. check by the battery there is a plugin if it is unplugged thats your problem. thats what i did and it fixed it.

Do you mean the plug that runs off the ground/negative side of the battery?

I think everything is plugged in correctly... I've gone over it 6 or 7 times...

(quote) woodsrider4ever
mabe the nutral safety switch is bad?


I replace the neutral switch that goes under the shifter, if that's the one youre talking about and it didnt help...


Anybody else wanna give me your thoughts...?

woodsrider4ever
04-26-2007, 06:36 PM
i was talking about the one up on the lever