mx 440ex parting out

[87-250R-racer]

I have a 1999 400ex I am parting out. Like the subject said mx not very many if any stock parts left all aftermarket.

here is a list of what i got just message me or call me for prices thanks.


99 frame good condition clean title powdercoated candy orange

laegar +2 a arms top powdercoated candy orange bottoms silvervain perfect shape everything is tight!

laegar tie rods

stock swingarm powdercoated silvervain.

tcs long travel suspension fronts and back fronts have remote rezzis not blown out!

lonestar axle carrier and lonestar +2 axle all in good shape.

stock steering stem

stock hubs

ac racing nerfs

k&n filter with custom mount air box eliminator bracket

carb is bored and modified and jetted

yoshimirua full exhaust system shorty

maier black plastic with skin industry graphics kit

rk chain and sprokets

black air shrouds

moose rear xc brake disc

stainless steel braided brake lines

motor ok here is the fun part. 1999 fresh top end brand new bottom end stage 2 hot cams heavy duty double rowed timing chain port and polished titanium vavles hardened rockers wiesco high compression piston hinson clutches barnette basket big bore kit which is a 440 like i said the motor fresh its not even in the quad its sititng at my engine builders house because he just re did everything and made sure it was good to go for whoever buys this motor will flat out scream

i got a complete wiring harness

aftermarket rev box made by profab atv

2 front and 1 rear brake caliper

and stock oil cooler oil tank and some other stuff just ask i most likely got it

if anyone is interesting in any prices my name is carl you can call me at 724-984-1623 or just pm me or post back on this thread like i said though motor is new and everything else is in great shape thanks.

[mach1stang]

you have a pm

[TRFOXX]

pmed you about the axle.

[the Z Man]

Price and pic of the nerfs, Z.

[pantherpit218]

pics of the black maier too pantherpit18@hotmail.com

[Jblazin98]

Send me some pics of the black plastics...I live 20 mins from you so i can pic them up....

Derrypd2@hotmail.com

[250x_kyle]

price and pics of aarms, shocks, frame, axel, moose rear xc brake disc , stainless steel braided brake lines

[the Z Man]

Checking to see if you got payment ok... Z. #41

[87-250R-racer]

yeah z man i got payment thanks for your business I will get that stuff shipped tomorrow night thanks again need anything else call me.

rear brake caliper sold

nerf bars sold

bearing carrier sold

throttle cable sold

thanks z man

[the Z Man]

Sweet deals here guys!! free bump!!

[JW450R1]

how much for the motor

[oldfartracer]

How much for the A-arms?
Are they standard travel?

[87-250R-racer]

$1100.00 for the motor its all brand new my motor builder still has it just waiting for someone to buy it.

$550.00 for the a arms they are +2 laegar all bushing and balljoints are good ill throw the tie rods in with them too.

[JW450R1]

Can u run pump gas or not?.
Is there a warrenty for the motor work?

[87-250R-racer]

you can run 94 pump gas

no there is no warranty with the motor work it is a race motor

no lonestar carrier is gone thanks z man! lol

[87-250R-racer]

lonestar carrier sold

ac nerf bars sold

rear brake system sold

throttle cable sold

willing to part out motor in pieces if noone wants it whole?!

still got lonestar axle, frame, a arms, motor, exhaust, steering stem, front brake set up, moose rear xc rotor, rk chain and sprockets, front spindles, front and back hubs, k&n filters, custon built carb, fuel tank, all fenders, tcs shocks, lots and lots of misc need something just ask i got it and want to sell it! thanks carl

[87-250R-racer]

anyone bump

[dirkparsons]

do you still have the exhaust?

[Convert]

How much for the shocks?

[4door5g]

how much for the exh?

[AtvMxRider]

How much for axle?

[87-250R-racer]

gonna start putting stuff of ebay!!!! let me know last chances

[87-250R-racer]

exhaust 140 for full system

shocks 800 for 2 fronts and 1 back with extra spring

or 400 for front 2

or 400 for back with extra spring

axle 120.00 with just sproket hub

still have motor frame subframe a arms steering stem swingarm a ton of other stuff if you need something thats not listed just message me cause i will almost guarente i got it..

plastic is sale pending???

[AtvMxRider]

Interested in axle but I need pictures 1st. atvmxrider@hotmail.com

[AtvMxRider]

your pm box is full. I emailed you

[87-250R-racer]

my pm box is cleaned out and i emailed you back about the axle thanks guys keep the questions and offers coming. will negotiate prices thanks

[87-250R-racer]

my pm box is cleaned out and i emailed you back about the axle thanks guys keep the questions and offers coming. will negotiate prices thanks

[87-250R-racer]

I have a sale pending on the lonestar axle atvmxrider. thank you plenty of parts and good deals left pm me or email or call or post on the forum thanks again.

[87-250R-racer]

MOTOR WENT ON EBAY 4-19-07

Still got frame and subframe powdercoated candy orange, laegar +2 +1 standard travel a arms with laegar tie rods, front brake set up, steering stem, swingarm, tcs suspension very good shape normal scratches and what not but they are NOT blown out, rk chain and sprokets, moose xc rear brake disc, spindles, so much other little stuff just message me I know i got it!!!!

lonestar axle carrier-sold

plastic-sold

nerf bars-sold

rear brake system-sold

throttle cable-sold

lonestar extended axle-sale pending???

call me or pm me or email me with questions 724-984-1623 or oafen426ex@hotmail.com

i do except money orders cashiers checks and paypal

[87-250R-racer]

MOTOR WENT ON EBAY 4-19-07

Still got frame and subframe powdercoated candy orange, laegar +2 +1 standard travel a arms with laegar tie rods, front brake set up, steering stem, swingarm, tcs suspension very good shape normal scratches and what not but they are NOT blown out, rk chain and sprokets, moose xc rear brake disc, spindles, so much other little stuff just message me I know i got it!!!!

lonestar axle carrier-sold

plastic-sold

nerf bars-sold

rear brake system-sold

throttle cable-sold

lonestar extended axle-sale pending???

call me or pm me or email me with questions 724-984-1623 or oafen426ex@hotmail.com

i do except money orders cashiers checks and paypal

[quadracer440ex]

how much for the a-arms

[pantherpit218]

inbox is full, send me a pm if you got time

[87-250R-racer]

I am gonna post some pics of the a arms tonight and maybe of the axle motor is down to 1 day on ebay so if you are interested bid there. my ebay name is dutzmanracing17 still got a ton of parts and I just cut all prices. pm me or email me or call for new prices. thanks

[dkeen73]

How much are you asking for these, and what color are they? Thanks

[NeedsaYfz]

How much for the steering stem? Pics?

[87-250R-racer]

Stainless steel braided brake lines are gone they are stainless steel no color to them just shiny stainless steel!

60 for stem and clamps

[87-250R-racer]

frame podwer coated candy orange

subframe powdercoated candy orange

laegar +2 +1 standard travel a arms and tie rods

axle +4 lonestar with wheel hubs brake hub and sproket hub

steering stem stock

black air shrouds

front hubs spindles calipers master cylinder

k&n filter with air box eliminator bracket

tcs suspension front have remote rezzi's fully adjustable

rk chain and sprokets very little use 14 38 sproket size

yoshimirua full exhaust system shorty silencer

MOTOR IS ON EBAY ENDING WITHIN THE NEXT 2 HOURS!!!!!!

[ddtt145]

how much for the suspension?
Thanks
Trae

[87-250R-racer]

800 for both front and back and extra back spring

[dirkparsons]

Hey not sure if you sent me a message, my server isn't accepting outside mail. If you still have the yoshi system send me a pic to this address, thanks.dirkwadeparsons@hotmail.com

[87-250R-racer]

Frame 450 + Shipping comes with clean title powder coated candy orange very sick looking straight not bent broke repaired or anything.

Subframe 180 + Shipping powder coated candy orange

Steering stem 60 shipped

Wiring harness 40 shipped

RK Chain and Sprokets 40 shipped almost new

Moose XC Brake Disc 30 Shipped

Front brake system Calipers Spindles Master Cylinder Lines Rotors Pads 200 + shipping for everything.

Parts Sold

Plastic

Axle

Nerfs

Rear Brake system

Sale Pending

A Arms

Axle

Shrouds

Motor


any questions call me pm me or email me thanks carl.

[quadracer440ex]

what kind of stem do you have??

[87-250R-racer]

stem is stock

[LeGaCyGiAnT124]

30 shipped for the front brakelines?

[87-250R-racer]

All i got is stock left stainless are sold let me know if you need stock 25 shipped

[CBRSLIDER]

Interested in the chain and sprocket set. Also do you have the stock rear hubs? If so do they have the studs and are any of the studs spinning in the hub? If you have them, how much do you want for them and the sprocket/chain shipped to 15845(northcentral pa)?

Thanks
Ray

[87-250R-racer]

Do not have the hubs sold them with the axle last week sorry but i do got chain and sprokets 40 shipped up to ya im in southwestern pa. let me know they are really good shape.

[CBRSLIDER]

PM me where to send the money and how you want the funds, ie..money order, paypal, personal check(don't worry about gettn screwed, I'm a PA State Trooper, so screwing you would screw me in the long run). Also do you by any chance have your stock foot pegs? If so if they are in good shape, how much would you want? Also pm me with any other little stock parts you might have...nuts, bolts, bushings, misc. bearings(if new), etc.... I'm trying to get mine back up and running in good shape.

Ray

[bigmikey119]

What about the motor

[87-250R-racer]

bigmikey119 sorry yeah its sold to you ebay hasnt been letting me email you back for some reason motor builder still has it though he got kinda tied up in a project before mine but its deff yours if you still want it sorry about the delay but he's trying for next week. keep you in touch.

[CBRSLIDER]

tried to pm you back but your box is full. i am having serious pc problems here at home and i'm off for the weekend. so as soon as i can get either back to work or to my sister's to use her pc, i'll get the money transferred to you. sorry for the delay but this home pc SUX!!!!! i'm ready to smash it! also do you have the foot peg bolts with the pegs? And any of the misc 10mm and 12mm bolts? If so let me know. Thanks.

Ray

[87-250R-racer]

Thanks for the pm box info

and yeah i got footpeg bolts ill throw them in with the foot pegs chain and sprokets let me know thanks

[bigmikey119]

ok, I could really use it by next weekend think that can happen?

[87-250R-racer]

bigmikey119 Im deff gonna try to get on his case and get that motor done i hope I can get it to you by then appreciate the patience.

[87-250R-racer]

Still got some 400ex parts for sale cutting prices gonna start listing items on ebay

Frame and Subframe w title 550 + shipping powdercoated candy orange

TCS Front and Rear suspension 700 shipped

Steering stem 40 + shipping perfectly straight

Yoshimirua Full Exhaust System Shorty 100 shipped

Stock Swingarm 100 Shipped

Rear Linkage 40 shipped

Front Brake set up 160 shipped

Wiring harness 15 shipped

stock 450r bumper 20 shipped

RK Sprokets and Chain sold

Footpegs sold

pm me or reply on here or call me 724-984-1623 stuff needs to go
thanks carl

[87-250R-racer]

This is the last week that ill be advertising parts on here im putting everything on ebay so if you want anything you get to let me know asap

motor is sold to bigmikey119 when its done

still got frame subframe tcs suspension yoshi shorty pipe wiring harness moose xc rear brake rotor steering stem denton steering stabilizer stock 450r bumper swingarm rear shock linkage front brake setup.

thanks carl

[400exrider44]

do u still have the a-arms?

[87-250R-racer]

a arms steering stabilzer front brake setup all sold!!!!

still got frame, subframe, swingarm, steering stem, wiring harness, air scoops, and thats about it. if stuff does not sell this week its going on ebay need to move these parts. someone got to need a frame out there. let me know

thanks carl

[weekendracer91]

how much for the motor, pm me

very interested

[bigmikey119]

Originally posted by weekendracer91
how much for the motor, pm me

very interested

The motor is mine! ;)

[87-250R-racer]

sorry already promised to bigmikey119 when vpsatv finishes it

[iraq66]

hey did you get my paymet for the yoshi shorty pipe and the scoops?????


brent

[87-250R-racer]

yes i got payment for pipe and air shrouds thank you will ship them out friday morning with all the other stuff i got to ship thank you carl dutzman

[87-250R-racer]

Ok well i got good news and bad news about my motor for sale. its gonna cost more than what i want to put into it to fix it its still promised to bigmikey119 and i told him the new price for the motor as is. if he doesnt want it i am gonna relist it back on here.

ok as for what else is left

parts

frame sale pending

subframe 150 shipped

k&n filter with air box eliminator braket 35 shipped

oil tank oil cooler and lines 50 shipped

swingarm 75 shipped

wiring harness 25 shipped

steering stem 50 shipped

gas tank 30 shipped

any questions pm me or call me 724-984-1623 thanks carl

[bigmikey119]

PM sent!

[87-250R-racer]

Frame sale pending

motor parting out

head sale pending

bottom end needs connecting rod 250 shipped

stage 2 hot cam 40 shipped

valve cover 15 shipped

rear shock linkage 20 shipped

subframe 100 shipped

steering stem 50 shipped

oil cooler and oil canister and lines 45 shipped

wiring harness 10 shipped

pm me or call me 724-984-1623 thanks carl

[chronicareo]

called u

[87-250R-racer]

Frame and Subframe 450 + shipped perfect condition powdercoated candy orange with clean title

bottom end very good condition needs connecting rod has hinson clutch kit in 250

wiring harness 10 shipped

pro fab atv revv box 60 shipped

pro fab custom built carb 100 shipped

steering stem 60 shipped

willing to make deals for honda bolt battern beadlocks or mx tires??? or aftermarket 450r parts. let me know what you got.

[87-250R-racer]

Still got a few things left wanting to get rid of them trade maybe for some beadlocks?

subframe 150 shipped

steering stem 60 shipped

wiring harness 15 shipped

revv box 55 shipped

profab custom build carb 100 shipped

1999 bottom end 350 shipped needs connecting rod has hinson clutch basket with barnette plates.

1999 440 cylinder 125 shipped

call me or pm me 724-984-1623 thanks carl

[87-250R-racer]

need to sell start making offers

subframe powdercoated candy orange

wiring harness

revv box

profab custom built carb

440 cylinder

bottom end complete or will part out???

steering stem. let me know what all offers are stuff needs to go asap.

[bigmikey119]

hey I pmed you again about you clutch and cam chain

[chronicareo]

cam chain is mines buuuuuddy

[400exrider113]

do you still have the frame and sub frame

[87-250R-racer]

Frame is sold i still got the subframe and cam chain is sold

pm me or call me if interested in subframe 724-984-1623

[87-250R-racer]

Still got some 400 parts left

subframe

bottom end

440 cylinder

stock stem not bent

pro fab atv revv box

some other little parts too let me know what ya need i might have it!

[rbb2101]

I am looking for an oil Tank for my 400 ex would you have you by chance.

[87-250R-racer]

i might have an extra one around let me look and ill pm you 25 shipped and its yours if i got one.

[powerstroke7.3]

is your carb twist throttle

[87-250R-racer]

carb does not have any throttle on it i sold the thumb throttle and cable but you can get a twister and a cable for it no problem.

[powerstroke7.3]

what kind of cable does it take for a twist throttle, where can i get one

[billyboy]

PM SENT

[powerstroke7.3]

i didn't get the pm, could you send it again. thanks

[87-250R-racer]

you can just buy a motion pro twist throttle kit and then buy a regular carb the carb doesnt have to be special.

[powerstroke7.3]

i just picked up a carb, thanks

i dont know if you are interested in a 250r swingarm (jb racing) and a durablue adjustable linkage

[atvhonda-rider]

hey man i sent u a PM on the a-arms, as i read their sold so nvm then! what about the stg. 2 cam? thanks

[450Racer]

what condition is the chain in? and if so how much? very interested. thanks.